Hyaluronan Isolation from Mouse Mammary Gland

Materials and Reagents

1. Pipette tips (Fisher Scientific, catalog numbers: 02-707-417 , 02-707-408 , 02-707-438 )
   
2. 1.5 ml Eppendorf microcentrifuge tubes (Diamed Advan Tech, catalog number: AD150-N )
   
3. Slide-A-Lyzer^® MINI Dialysis Devices 7K MWCO, 0.1 ml (Thermo Fisher Scientific, catalog number: 69560 )
   
4. Slide-A-Lyzer^® MINI Dialysis Devices 3.5K MWCO, 0.5 ml/2 ml (Thermo Fisher Scientific, catalog number: 88400 / 88403 )
   
5. Pierce Strong Anion Exchange Spin Column, Mini (Thermo Fisher Scientific, catalog number: 90010 )
   
6. C57Bl/6 female mice
   
7. Sterile de-ionized water
   
8. NaOH (BioShop, catalog number: SHY700.500 )
   
9. Tris base (121.1 g/mole) (BioShop, catalog number: TRS001.1 )
   
10. NaCl (58.44 g/mole) (BioShop, catalog number: SOD001.10 )
    
11. SDS (BioShop, catalog number: SDS001 )
    
12. CaCl₂·2H₂O (147.0 g/mole) (Sigma-Aldrich, catalog number: C3306 )
    
13. PBS (WISENT, catalog number: 311-425-CL )
    
14. Proteinase K (Roche Diagnostics, catalog number: 03115879001 ), recombinant, PCR grade
    Note: It is approximately 2.5 U/mg when assayed with the Chromozym assay, or 30 U/mg with the hemoglobin assay.
    
15. Chloroform (reagent grade, Acros Organics, catalog number: 423555000 )
    
16. Ethanol (EtOH), 100%
    
17. Deferoxamine mesylate salt (=deferoxamine methanesulfonate salt) (657 g/mole) (Sigma Aldrich, catalog number: 1166003 )
    
18. Benzonase (Sigma-Aldrich, catalog number: E1014 ) recombinant 250 U/μl
    
19. 0.2 M NaOH (see Recipes)
    
20. 1 M Tris pH 8.3 (see Recipes)
    
21. 5 M NaCl (see Recipes)
    
22. 10% SDS (see Recipes)
    
23. 1 M CaCl₂ (see Recipes)
    
24. Proteinase K solution, 20 mg/ml (see Recipes)
    
25. Deferoxamine mesylate solution, 50 mg/ml (see Recipes)
    
26. Tissue lysis buffer (see Recipes)
    
27. 0.1 M NaCl (see Recipes)
    
28. Benzonase digestion buffer (see Recipes)
    
29. NaCl solutions for ion exchange (IEX) fractionation (see Recipes)

Equipment

1. Pipettor (Drummond Scientific, Pipet-Aid^®, model: XP² )
   
2. Pipetman (Gilson, model: PIPETMAN^® Classic )
   
3. Incubator capable to hold 37 °C (VWR, model: 1510 E )
   
4. Eppendorf Thermomixer (Eppendorf, model: ThermoMixer^® R )
   
5. Refrigerated tabletop microcentrifuge capable of 18,000 x g (Thermo Fisher Scientific, model: Sorvall^TM Legend^TM Micro 21R )
   
6. Rotor included with Sorvall^TM Legend^TM Micro 21R
   
7. Flammable materials storage freezer, -20 °C
   
8. Fisher Scientific stirring Hotplate
   
9. Biohazard/Laminar flow hood
   
10. Digital Analytical Balance Scale (U.S. Solid Store, model: USS-DBS5 ); Repeatability: ± 0.2 mg
    
11. Balance scale (Denver Instrument, model: XS-310 D , Repeatability ± 0.02 g
    
12. pH meter (Fisher Scientific, model: accumet^TM AR15 )
    
13. Fluorophore-assisted carbohydrate electrophoresis (FACE)
    

Procedure

Note: The dialysis and precipitation steps do not cause losses of HA fragments as small as 4 kDa.

1. HA extraction from mouse mammary gland
   Mammary glands were isolated from 8 weeks old C57Bl/6 female mice as described in Tolg et al. (in review) Steps 2-3. The typical HA yield is 5-15 µg/100 mg tissue.
   
   1. Add 800 µl of tissue lysis buffer to 50-200 mg mammary gland tissue.
      
   2. Incubate samples 16-24 h at 55 °C. Mix samples during incubation, an Eppendorf Thermomixer at 500 rpm mixing speed works well.
      
   3. The following day, centrifuge digested samples at 18,000 x g (13,000 rpm) for 5 min at room temperature. This step removes undigested debris. Dispose of undigested debris as a biohazard.
      
   4. Pour the supernatant into a new Eppendorf microcentrifuge tube.
      
   5. Increase the NaCl concentration of the sample to 2 M by adding 11.7 mg NaCl powder/100 µl sample. Dissolve the NaCl powder by inverting samples end over end 10 times, then let samples sit for 1 min to allow undissolved NaCl crystals sink to the bottom of the tube where they will be visible. If necessary, repeat mixing until NaCl is dissolved. It takes a few minutes for the NaCl to dissolve.
      
   6. Remove proteinase K by chloroform extraction: Determine the sample volume and add the same volume of chloroform to the sample and mix by turning the sample upside down several times.
      
   7. Centrifuge the sample for 10 min at 18,000 x g (13,000 rpm) to separate aqueous and chloroform phases.
      
   8. Transfer the upper aqueous phase (Figure 1) into a new Eppendorf tube and repeat the chloroform extraction (Step A6).
      
      
      Figure 1. Separation of aqueous and chloroform phases. After centrifugation the aqueous (top) and chloroform (bottom) phases are clearly visible.
      
      
   9. Centrifuge the sample for 10 min at 18,000 x g (13,000 rpm) and transfer the upper aqueous phase into a new Eppendorf tube.
      
   10. Reduce NaCl concentration by dialysis against 0.1 M NaCl: Remove 80% of the aqueous phase of each sample and transfer into two MINI Dialysis Units (7,000 MWCO, 0.1 ml capacity). Add the Dialysis Units to a beaker with 4 L of 0.1 M NaCl and dialyze for 2 h at 4 °C. During dialysis, slowly stir the 0.1 M NaCl using a magnetic stirring plate.
       
   11. Precipitate HA by Ethanol precipitation: Transfer samples from the Dialysis unit into 1.5 ml micro-centrifuge tubes, add 4 vol of 100% EtOH, mix and then store 16-24 h at -20 °C. Samples can be stored at -20 °C for up to one week.
       
   12. Centrifuge samples for 30 min at 18,000 x g (13,000 rpm), 4 °C.
       
   13. Remove supernatant and discard as chemical waste. Add 500 µl cold 70% EtOH to the pellet. Mix and repeat centrifugation for 10 min at 18,000 x g (13,000 rpm), 4 °C.
       
   14. Remove supernatant and discard as chemical waste. Allow HA pellet to dry by keeping sample tubes open under the cell culture or laminar flow hood for 1 h.
       
   15. Remove co-precipitated DNA by digestion with the nuclease Benzonase: Dissolve HA pellet in 100 µl of 50 mM Tris pH 8.3, 20 mM NaCl, containing 500 U Benzonase and digest for 4 h at 37 °C.
       
   16. Increase the NaCl concentration of the sample to 2 M by dissolving 11.7 mg NaCl powder directly in the sample as described in Step A5.
       
   17. Determine the sample volume and add the same volume of chloroform to the sample and mix by turning the sample upside down several times.
       
   18. Centrifuge the sample for 10 min at 18,000 x g (13,000 rpm) to separate aqueous and chloroform phases.
       
   19. Remove 80% of the aqueous phase of each sample and transfer into two MINI Dialysis Units 7,000 MWCO, 0.1 ml capacity. Add the Dialysis Units to a beaker with 4 L of 0.1 M NaCl and dialyze for 2 h at 4 °C. During dialysis, slowly stir the 0.1 M NaCl using a magnetic stirring plate.
       
   20. Transfer samples from the Dialysis unit, add 4 vol of 100% EtOH, mix then store 16-24 h at -20 °C. Samples can be stored at -20 °C for up to one week.
       
   21. Centrifuge samples for 30 min at 18,000 x g (13,000 rpm), 4 °C.
       
   22. Remove supernatant and add 500 µl cold 70% EtOH. Mix and repeat centrifugation for 10 min at 18,000 x g (13,000 rpm), 4 °C.
       
   23. Remove supernatant and discard as chemical waste. Allow HA pellet to dry by keeping sample vials open under the cell culture or laminar flow hood for 1 h.
       
   24. Dissolve HA in 50 µl deionized H₂O.
       
   25. The yield is usually about 5-15 µg HA per 100 mg tissue.
       
   
   
2. Further HA purification and size fractionation by ion exchange (IEX)
   Notes:
   1. This technique is a stepwise elution technique, involving pre-wash and equilibration of IEX spin columns, HA sample loading, and sample elution by applying NaCl solutions with increasing concentration. This technique is able to remove some non-HA contaminants and to fractionate a polydisperse HA sample into low polydispersity (i.e., narrow size range) fractions between ca. 7 and 100 kDa, but does not subfractionate the higher molecular mass HA components. No preferential sample loss for any size of HA in IEX fractionation is observed. Very high molecular mass HA can also be washed out from the column without sample loss, due to the porous structure (3µ) of the column material (a regenerated cellulose-based membrane).
      
   2. All relevant solutions and apparatus must be at room temperature before use. Temperature affects the size of HA eluted from the IEX column. If cold elution solutions are used, HA will be prematurely eluted at a lower salt concentration than expected. Elution reproducibility is also strongly dependent on centrifugation time and force applied to the IEX columns. The centrifugal force and time applied to the IEX spin column need to be kept constant, and the force is recommended to be no higher than 400 x g. Higher force can result in premature release of HA from the column.
      
   3. The passed liquid is collected in 1.5 ml microcentrifuge tubes with caps open and pointed toward the center of the rotor. Always align the printed letter Q in the IEX column toward the center of the fixed angle rotor, so that the solution can pass through the column resin uniformly. For each step, centrifuge at 400 x g for 2-5 min. It is recommended to spin for 2 min and check to see if the solution has passed. Spin for 1 min at a time and check repeatedly until all of the solution has passed. It is important not to over spin the columns. Do not wait for long periods between elution steps, as the column may dry out and prevent proper elution of the solutions and sample.
      
   4. If the sample volume is much larger than 400 µl, several columns may be used. This works better than repeated loading of a single column.
      
   5. The sample pH should be higher than ~5. The pKa for HA is ~3.2, and the pH of the NaCl solution is ~5.6.
      
   6. Elution using NaCl concentrations of 0.9 to 2.0 M elute sulfated glycosaminoglycans.
      
      
   1. Sample preparation
      HA samples are loaded in 0.1 M NaCl. The HA stock concentration should be less than about 0.5 µg/µl. You will use 400 µl of each sample. The maximum load is about 200 µg per column. If starting with HA sample in de-ionized water, add 2 M NaCl to bring the final salt concentration to 0.1 M.
      
   2. Pre-washing and equilibration of the IEX columns
      We found that an unknown (possibly cationic) species may be shed from the columns during sample elution and later cause precipitation of HA following fractionation and dialysis. The IEX column is therefore pre-washed once with 400 µl of 0.1 M NaCl, then 3 times with 400 µl of 0.800 M NaCl, and then re-equilibrated using 5 washes with 400 µl of 0.100 M NaCl before use.
      
   3. Sample loading on column
      Load 400 µl HA sample solution (in 0.1 M NaCl) onto the column and centrifuge at 400 x g for 2-min.
      
   4. Wash through unbound or weakly bound material
      
      1. Wash the column with 400 µl 0.1 M NaCl to fully elute unbound neutral or positively charged contaminants.
         
      2. Then wash the column with 400 µl 0.2 M NaCl three times to remove any weakly bound impurities. Only HA less than ~4 kDa (10 disaccharides long) will elute at this concentration. Fractions collected using 0.2 M NaCl can be analyzed for HA oligomers by fluorophore-assisted carbohydrate electrophoresis (FACE).
   5. HA Fraction Elution
      Elute HA from low to high molecular mass by increasing NaCl concentration in each elution. For each elution, 2 x washes are needed to completely wash out that HA fraction. Combine the elutions from the same NaCl concentrations for dialysis. HA will be eluted out by NaCl solutions from 0.3 to 0.8 M. The molecular mass of HA eluted at a range of NaCl concentrations are listed below (Table 1 and Table 2).
      
      Table 1. Summary IEX Steps, 4 step method
      
      
      
      
      Table 2. HA size characteristics eluted at different NaCl concentrations
      
      
      
   6. Removal of NaCl from HA fractions: Dialyze exhaustively to de-ionized water before concentrating or drying. Centrifugal concentration of HA solutions containing salt can cause HA degradation. Alternatively, precipitate HA with 4 vol EtOH.

Data analysis

The purified HA fractions can be quantified using an ELISA kit (for example kit K-1200, ECHELON) or by agarose gel electrophoresis and image analysis.

Recipes

1. 0.2 M NaOH
   Dissolve 0.8 g NaOH in 100 ml deionized water
   
2. 1 M Tris pH 8.3
   
   1. Dissolve 12.1 g Tris base powder in 80 ml de-ionized water
      
   2. Adjust pH to 8.3 with 12 N HCl
      
   3. Add deionized water to final volume of 100 ml
      
   4. Autoclave
3. 5 M NaCl
   
   1. Dissolve 29.22 g NaCl in deionized water to final volume of 100 ml
      
   2. Autoclave
4. 10% SDS
   Dissolve 10 g SDS powder in 100 ml deionized water
   
5. 1 M CaCl₂
   
   1. Dissolve 14.7 g CaCl₂·2H₂O in deionized water to final volume of 100 ml
      
   2. Autoclave
6. Proteinase K solution, 20 mg/ml
   Note: Ca. 25 U/ml when assayed by the Chromozym assay, or 300 U/ml using the hemoglobin assay.
   
   1. Dissolve 20 mg Proteinase K in 1 ml PBS buffer
      
   2. Divide into 0.1 ml aliquots and store at -20 °C
7. Deferoxamine mesylate solution, 50 mg/ml (= 0.076 M)
   
   1. Dissolve 50 mg deferoxamine mesylate in 1 ml deionized water
      
   2. Divide into 50 μl aliquots and store at -20 °C
8. Tissue lysis buffer
   
   1. Premix buffer stock:
      15 ml 1 M Tris pH 8.3
      3 ml 5 M NaCl
      1 ml 1 M CaCl₂
      1 ml 10% SDS
      80 ml sterile deionized water
      Note: This buffer stock composition is 0.15 M Tris pH 8.3, 0.15 M NaCl, 0.01 M CaCl₂, 0.1% SDS.
      
   2. Just before use, add 100 µl Proteinase K solution and 657 µl deferoxamine mesylate solution to 10 ml above buffer stock.
      
   3. Final composition in tissue lysis buffer is:
      0.2 mg/ml Proteinase K (2.5 U/ml by Chromzym assay, or 30 U/ml by hemoglobin assay)
      3.285 mg/ml (0.005 M) deferoxamine mesylate
9. 0.1 M NaCl
   Dissolve 5.8 g NaCl in deionized water to final volume of 1 L
   
10. Benzonase digestion buffer
    50 mM Tris pH 8.3,
    20 mM NaCl
    500 U/ml Benzonase
    
    1. Add 5 ml 1 M Tris pH 8.3 and 0.4 ml 5 M NaCl to 94.6 ml deionized sterile water
       
    2. Just before use, add 20 µl Benzonase to 1 ml digestion buffer
11. NaCl solutions for ion exchange (IEX) fractionation
    Note: Prepare the NaCl solutions one day prior to IEX experiment. Leave all solutions at room temperature overnight.
    1. 2.00 M NaCl stock solution for IEX: Dissolve 11.688 g NaCl in deionized
       
    2. water to 100 ml final volume
       
    3. Diluted NaCl solutions for washing and elution of IEX columns
       
    4. Make dilutions of the 2 M NaCl stock solution as described below:
       
       

Acknowledgments

This work was supported by a CBCF grant to ET and The Endre A. Balazs Foundation to MC. This protocol was adapted from Tolg et al. (2012 and 2017) and Yuan et al. (2015).

Competing interests

Authors have no conflict of interest.

References

1. Calabro, A., Benavides, M., Tammi, M., Hascall, V. C. and Midura, R. J. (2000). Microanalysis of enzyme digests of hyaluronan and chondroitin/dermatan sulfate by fluorophore-assisted carbohydrate electrophoresis (FACE). Glycobiology 10(3): 273-281.
   
2. Tolg, C., Cowman, M., and Turley E. A. (2018). Mouse mammary gland whole mount preparation and analysis. Bio-protocol 8(13): e2915.
   
3. Tolg, C., Hamilton, S. R., Zalinska, E., McCulloch, L., Amin, R., Akentieva, N., Winnik, F., Savani, R., Bagli, D. J., Luyt, L. G., Cowman, M. K., McCarthy, J. B. and Turley, E. A. (2012). A RHAMM mimetic peptide blocks hyaluronan signaling and reduces inflammation and fibrogenesis in excisional skin wounds. Am J Pathol 181(4): 1250-1270.
   
4. Tolg, C., Yuan, H., Flynn, S. M., Basu, K., Ma, J., Tse, K. C. K., Kowalska, B., Vulkanesku, D., Cowman, M. K., McCarthy, J. B. and Turley, E. A. (2017). Hyaluronan modulates growth factor induced mammary gland branching in a size dependent manner. Matrix Biol 63: 117-132.
   
5. Yuan, H., Amin, R., Ye, X., de la Motte, C. A. and Cowman, M. K. (2015). Determination of hyaluronan molecular mass distribution in human breast milk. Anal Biochem 474: 78-88.