Adhesion and Invasion Assay Procedure Using Caco-2 Cells for Listeria monocytogenes

Materials and Reagents

1. MF-Millipore filters (EMD Millipore, catalog number: SCGPU05RE )
   
2. Eppendorf tubes (Eppendorf, catalog number: 022363204 )
   
3. Cell culture flasks (Corning, catalog number: 3275 )
   
4. Cell culture plates (12-well cell culture receiver plate, sterile) (EMD Millipore, catalog number: PIMWS1250 )
   
5. Pipette tip 
   
6. 15 ml culture tube
   
7. Cell scrapers (Corning, catalog number: 3010 )
   
8. ZapCap bottle-top filters, pore size 0.2 µm (Maine Manufacturing, catalog number: 10443421 )
   
9. Serological pipettes (1, 5, 10, 25, 50 ml) (Corning, catalog numbers: 4010 , 4050 , 4100 , 4250 , 4501 )
   
10. Culture tubes (Sigma-Aldrich, catalog number: T1661 )
    
11. Listeria monocytogenes strains F2365 (wild type strain), and F2365∆2117(mutant strain) (Reddy et al., 2016)
    
12. Caco-2 cell line (ATCC, catalog number: HTB-37 )
    
13. 70% ethanol (Fisher Scientific, catalog number: BP82014 )
    
14. Trypsin-EDTA solution (Sigma-Aldrich, catalog number: T3924 )
    
15. Brain Heart Infusion (BHI) agar (Sigma-Aldrich, catalog number: 70138 )
    
16. BHI broth (Sigma-Aldrich, catalog number: 53286 )
    
17. Gentamicin (Sigma-Aldrich, catalog number: G1397 )
    
18. Eagle’s minimum Essential medium (EMEM) (ATCC, catalog number: 30-2003 )
    
19. Fetal bovine serum, certified, heat inactivated (FBS) (Thermo Fisher Scientific, Gibco^TM, catalog number: 10082147 )
    
20. Penicillin-streptomycin (10,000 U/ml) (Thermo Fisher Scientific, Gibco^TM, catalog number: 15140122 )
    
21. Dulbecco’s phosphate buffered saline (Sigma-Aldrich, catalog number: D8537 )
    
22. Triton X-100 (Sigma-Aldrich, catalog number: 234729 )
    Note: This product has been discontinued.
    
23. Phosphate-buffered saline, 10x (PBS) (Sigma-Aldrich, catalog number: P5493 )
    
24. cEMEM (see Recipes)
    
25. 0.1% Triton-X 100 (see Recipes)
    
26. 1x PBS (see Recipes)
    

Equipment

1. Water bath, 37 °C (Thermo Fisher Scientific)
   
2. CO₂ forced-air incubator (Thermo Fisher Scientific, Thermo Scientific^TM, model: Forma^TM Steri-Cult^TM CO₂ Incubators , catalog number: 3307TS)
   
3. Biological safety cabinet (Thermo Fisher Scientific, Thermo Scientific^TM, model: 1300 Series Class II )
   
4. Inverted microscope(Nikon Instruments, model: Eclipse Ti-S )
   
5. Pipette (Thermo Fisher Scientific, Thermo Scientific^TM, catalog number: 4642070 )
   
6. Pipettor (Daigger Scientific, model: Portable Pipet-Aid XP Pipette Controller )
   
7. Hemacytometer (Fisher Scientific, catalog number: S17040 )
   
8. 37 °C incubator (Thermo Fisher Scientific)
   
9. 37°C shaker (Thermo Fisher Scientific)
   
10. Microcentrifuge, 4 °C (Eppendorf)
    
11. Fisher Scientific Sonic dismembrator (Fisher Scientific, model: 100 )
    
12. Vortex (Thermo Fisher Scientific, Thermo Scientific^TM, model: LP Vortex Mixer , catalog number: 88880018)
    

Procedure

1. Growing and maintaining Caco-2 cell lines
   1. Using MF-Millipore filters prepare media, Caco-2, human colon adenocarcinoma cells are maintained in cEMEM (complete EMEM, see Recipes)
      
   2. Seeding cells:
      
      1. Thaw a vial of frozen Caco-2 cells from ATCC (or previously frozen cells in the lab) by gentle agitation in a 37 °C water bath. To reduce the possibility of contamination, keep the O-ring and cap of the tube out of the water. Thawing should be rapid (approximately 2 min)
         
      2. Remove the vial from the water bath as soon as the contents are thawed, and decontaminate by dipping in or spraying with 70% ethanol. All of the operations from this point on should be carried out under strict aseptic conditions.
         
      3. Transfer the vial contents to a centrifuge tube containing 9.0 ml cEMEM and spin at 125 x g for 5 to 7 min. Discard supernatant. Resuspend cells in 1 ml cEMEM and transfer the cell suspension to flask containing pre-warmed (37 °C) cEMEM. Place the flask in CO₂ forced-air incubator at 37 °C.
         
      4. 24 h after seeding, check the cells under microscope for attachment, if attached to flask surface, slowly aspirate media to remove dead cells and add pre-warmed (37 °C) cEMEM.
   3. Re-feed cells every 48-72 h or when the color of the media changes. For re-feeding the cells, carefully aspirate the existing media using pipette and add fresh media to the flasks without disturbing the cells.
      
   4. Check cells for contamination and confluency every 48 h. When 80% of the flask surface is covered by cells, they are ready for passaging (Natoli et al., 2012).Cells need to be passaged for a minimum of 3 cycles before using them for the experiment. When the flask is contaminated, the media is cloudy and cells do not adhere to the flask surface.
      
   5. For passaging, remove media and wash monolayer with 1x PBS. Add 2-4 ml (depending on the size of flask) of trypsin-EDTA solution and incubate at 37 °C for 1-4 min (do not over incubate cells). When cells start sloughing add media (1:10, trypsin to media ratio) to inactivate trypsin and thoroughly pipette several times to get a uniform cell suspension.
      
   6. Count cells using a hemacytometer and seed a 12 well cell culture plate with a density of 10⁵ cells/well. Each cell will require 1 to 2 ml depending and the size and manufacturer. Calculate the cells accordingly.
      
      
2. Preparation of bacterial culture
   
   1. Using sterile microbiology technique streak listeria strains (WT and Mutant) from frozen cultures on BHI agar and place them in a 37 °C incubator for 48 h.
      
   2. From a freshly grown bacterial culture plate pick single isolated colony with a pipette tip and drop it in a 15 ml culture tube containing 10 ml BHI broth. Incubate the tubes in a 37 °C shaker for overnight. (see Note 5)
      
   3. Overnight cultures (15 ml) of F2365 (wild type) and F2365∆2117 (mutant) L. monocytogenes strains in BHI broth are adjusted to an OD₆₀₀ = 1.0 using fresh BHI broth on the day of infection if necessary.
      
   4. For each strain, pellet 100 µl of the above bacterial suspension in a bench top micro centrifuge for 2 min at 3,000 x g.
      
   5. Wash pellet and resuspend it in 1 ml of fresh warm (37 °C) cEMEM.
      
   6. Use 30 µl from step B3 for infections with Caco-2 cells.
      
      
3. Adhesion assay
   
   1. Plates with Caco-2 cells from step A5 are infected following the template shown in Figure 1 with bacterial culture from step B3 (Multiplicity of infection [MOI]: 1 Caco-2 cell:10 bacterial cells).
      
      
      Figure 1. Plate template for infection of Caco-2 cells. Caco-2 cells are seeded in 12 well cell culture plates and infected with appropriate bacterial strain as labeled in the template. Infections were performed in three replicates per plate for each strain. Three wells were uninfected or untreated and three wells were infected with cEMEM sans bacteria and acted as negative controls (NC1 and NC2).
      
      
   2. Infect one well at a time and change pipette tip after every infection. (see Note 4)
      
   3. Centrifuge the plates briefly for 45 sec and incubate them at 37 °C for 30 min. Centrifugation aids mixing and binding of bacteria to mammalian cells.
      
   4. After incubation wash cells five times with 1x PBS and lyse using 500 µl of cold 0.1% Triton X-100.
      
   5. The resulting suspensions are diluted (1/100, 1/1,000 and 1/10,000) using 1xPBS.
      
   6. 100 µl of 1/1,000 and 1/10,000 diluted suspensions are spread on BHI agar, and grown at 37 °C for 48 h. (see Note 5)
      
   7. 48 h post incubation count bacterial colonies, record and calculate colony forming units.
      
      
4. Invasion assay
   
   1. Plates with Caco-2 cells from step A5 are infected with bacterial culture from step B3 (MOI:1 Caco-2 cell:10 bacterial cells) as shown in Figure 1.
      
   2. Infect one well at a time and change pipette tip after every infection. (see Note 4)
      
   3. Centrifuge the plates briefly for 45 sec and incubate them at 37 °C for 2 h.
      
   4. After incubation wash twice with 1x PBS, and add fresh media containing gentamycin (100 µg/ml) to kill extracellular bacteria.
      
   5. At 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, and 24 h post-infection, cells are washed twice with 1x PBS and lysed using 500 µl of cold 0.1% Triton X-100. Once lysed cells float in the solution, using a pipette carefully mix the solution (without splashing) to remove adherent cells if any. Pipetting also helps in breaking mammalian cells.
      
   6. Transfer lysate from each well to separate appropriately labelled microcentrifuge tubes and proceed to sonication.
      
   7. Sonic dismembrator settings: setting 3 (operation frequency: 20 kHz and power rating: 120 watts), 3 pulses, 5 sec each helps in further lysis of Caco-2 cells but does not harm L. monocytogenes.
      
   8. 100 µl of 1/1,000 and 1/10,000 diluted suspensions are spread on BHI agar, and grown at 37 °C for 48 h. (see Note 5)
      
   9. 48 h post incubation count bacterial colonies, record and calculate colony forming units.
      

Data analysis

Note: Data can be analyzed by performing Student’s t-test using Microsoft Excel.

1. Calculate colony forming units based on the dilutions performed during plating.
   
2. For Student’s t-test use excel to calculate P-value (alpha), to investigate significant difference in adherent and intracellular bacterial numbers at post-infection in Caco-2 cells. An alpha’s level of 0.05 was used to determine statistical significance.
   
3. Calculate standard errors (for error bars) using Microsoft Excel.
   
4. Using Microsoft excel plot a bar graph for adhesion assay(Figure 2) and point scatter graph for invasion assay (Figure 3).
   
   
   Figure 2. Attachment to Caco-2 cells by F2365 and F2365∆2117. Each bar represents the mean of six replicates; standard error is indicated by error bars. *Indicates statistically significant difference from the other treatments. An alpha level of 0.05 was used to determine statistical significance.
   
   
   Figure 3. Invasion of Caco-2 cell line by F2365 and F2365∆2117. Each point represents the mean of six replicates; standard error is indicated by error bars. Statistically significant differences between F2365 and F2365∆2117 are indicated by *. An alpha level of 0.05 was used to determine statistical significance.
   

Notes

1. Make a note of dilutions when plating on BHI agar to use later for calculating the actual number of bacteria colony forming units from bacterial counts.
   
2. Perform all infections in triplicates, and execute 2 independent assays for each strain.
   
3. Include negative controls as shown and described in Figure 1. These negative controls should not produce colonies on BHI plates. If colonies are observed in negative controls then there has been a potential contamination and the experiments need to be repeated.
   
4. For each time point use one plate. Use two plates for each time point to obtain data for six replicates.
   
5. All the steps are done aseptically or in sterile conditions during this experiment, thus only one type of colonies (regular, round bacterial colonies) or no colonies should be observed on the plates. Listerial colonies are regular white rounded colonies occurring singly or in short chains. If there are multiple colored or non-identical colonies, then there has been a contamination.
   

Recipes

1. cEMEM (filter sterilized)
   400 ml EMEM
   100 ml FBS
   5 ml Pen/Step
   
2. 0.1% Triton-X 100 (filter sterilized)
   99.9 ml Milli-Q water
   100 µl 100% Triton-X 100
   3.1x PBS (filter sterilized)
   90 ml Milli-Q water
   10 ml 10x PBS
   

Acknowledgments

This protocol was adapted from the previously published studies (Reddy et al., 2016). This project was funded by USDA ARS Agreement #58-6402-2729, which is operated under USDA CRIS project MIS501170, ‘Mississippi Center for Food Safety and Post-Harvest Technology’.

References

1. Angelis, I. D., and Turco, L. (2011). Caco-2 cells as a model for intestinal absorption. Curr Protoc Toxicol Chapter 20.
   
2. Jaradat, Z. W. and Bhunia, A. K. (2003). Adhesion, invasion, and translocation characteristics of Listeria monocytogenes serotypes in Caco-2 cell and mouse models. Appl Environ Microbiol 69(6): 3640-3645.
   
3. Lecuit, M. (2005). Understanding how Listeria monocytogenes targets and crosses host barriers. Clin Microbiol Infect 11(6): 430-436.
   
4. Natoli, M., Leoni, B. D., D'Agnano, I., Zucco, F. and Felsani, A. (2012). Good Caco-2 cell culture practices. Toxicol In Vitro 26(8): 1243-1246.
   
5. Reddy, S., Akgul, A., Karsi, A., Abdelhamed, H., Wills, R. W. and Lawrence, M. L. (2016). The role of Listeria monocytogenes cell wall surface anchor protein LapB in virulence, adherence, and intracellular replication. Microb Pathog 92: 19-25.
   
6. Reddy, S. and Lawrence, M. L. (2014). Virulence characterization of Listeria monocytogenes. Methods Mol Biol 1157: 157-165.
   
7. Sambuy, Y., De Angelis, I., Ranaldi, G., Scarino, M. L., Stammati, A. and Zucco, F. (2005). The Caco-2 cell line as a model of the intestinal barrier: influence of cell and culture-related factors on Caco-2 cell functional characteristics. Cell Biol Toxicol 21(1): 1-26.