In vitro Floral Induction of Cuscuta reflexa

Materials and Reagents

1. Pipette tips (Tarsons)
   
2. 5 ml syringe (Himedia)
   
3. 0.45 micron filter (Himedia)
   
4. Stem explants of Cuscuta reflexa
   
5. Murashige & Skoog (MS) basal medium (Murashige and Skoog, 1962) (Sigma-Aldrich, catalog number: M5519 )
   
6. Sucrose (Sigma-Aldrich, catalog number: S0389 )
   
7. Gamborg’s vitamin solution (Sigma-Aldrich, catalog number: G1019 )
   
8. Agar (HiMedia Laboratories, catalog number: PCT0901 )
   
9. 2,4-dichlorophenoxyacetic acid (2,4-D) (Sigma-Aldrich, catalog number: D7299 )
   
10. Naphthalene acetic acid (NAA) (Sigma-Aldrich, catalog number: N0640 )
    
11. Sodium hydroxide (NaOH) (Sigma-Aldrich, catalog number: 221465 )
    
12. Mercury(II) chloride (HgCl₂) (0.01%) (EMD Millipore, catalog number: 104419 )
    
13. Bavistin (1% solution, Swat agro chemicals)
    
14. Ethanol (EMD Millipore, catalog number: 100983 )
    
15. MMS (modified Murashige Skoog) media (see Recipes)
    
16. 2,4-D stock solution (see Recipes)
    
17. NAA stock solution (see Recipes)
    
18. Floral induction media-1 (see Recipes)
    
19. Floral induction media-2 (see Recipes)
    
20. HgCl₂ (0.1%) (see Recipes)
    
21. Bavistin solution (1%) (see Recipes)
    

Equipment

1. 0.5-10 μl pipette (Transferpette^®) (BRAND, catalog number: 704770 )
   
2. 20-200 μl pipette (Transferpette^®) (BRAND, catalog number: 704778 )
   
3. 100-1,000 μl pipette (Transferpette^®) (BRAND, catalog number: 704780 )
   
4. Beaker (200 ml, Borosil)
   
5. Laminar hood (Thermo Fisher Scientific)
   
6. Conical flask (150 ml, Borosil)
   
7. Culture room (Daihan LabTech India, model: LGC-S201 )
   
8. Autoclave
   
9. Forceps (ACE Surgical Supply Company, catalog number: 20-000-48 )
   
10. Oven (Hicon India)
    
11. Water distillation unit (Mars Scientific Instruments, catalog number: BASIC/pH4 & XL )
    
12. pH meter (CD Hightech, model: APX 175 E )
    
13. Weighing machine (Sartorius, model: BSA224S-CW )
    
14. Scissor (general cutting scissor)
    

Procedure

1. Explant surface sterilization
   1. Nodal region (Figure 1A) of the Cuscuta reflexa plant (2-month-old) grown naturally on bougainvillea plant was taken as the starting material.
      
   2. Keep small pieces (around 20 pieces taken here) of Cuscuta reflexa nodal stem explants (1-2 cm length, Figure 1A) inside a beaker. Treat (submerge) the explants in 100 ml of 1% Bavistin solution for 10 min inside a laminar hood to make those free from dust or any other external contaminations.
      
      
      Figure 1. Floral induction from Cuscuta reflexa nodal explants. A. Nodal explants inoculated in MMS media supplemented with floral induction hormone/hormones. B and C. Shoot regeneration following floral induction in Cuscuta reflexa nodal explants where the MMS media was supplemented with both 2,4-D and NAA. D. Direct floral bud initiation from Cuscuta reflexa nodal explants where the MMS media was supplemented with only 2,4-D.
      
      
   3. Rinse the explants with autoclaved distilled water inside a laminar hood by brief shaking with hand.
      
   4. Decant the distilled water and pour 100 ml of 0.1% HgCl₂ into the same beaker for surface sterilization inside the laminar hood. Surface sterile the explants for 5 min with brief shaking by hand.
      
      
2. Inoculation of explants for floral induction
   
   1. Inoculate some of the explants (stuck up to 0.5 cm of 3 to 4 explants into media of one flask, Figure 1A) in the conical flask containing floral induction media-1 and inoculate some explants in floral induction media-2 (method for preparation of floral induction media-1 and -2 is described in Recipes section).
      
   2. Plug all the conical flasks containing the media with the explants air tight to avoid any bacterial and/or fungal contamination.
      
   3. Keep the conical flasks inside a tissue culture room where controlled light (1,000 lux) and temperature condition (28 ± 1 °C, 12 h dark/light period) will be maintained.
      
   4. Notice the proliferation of nodal region (Figure 1B) and generation of shoots and/or floral buds. It will take around 25 to 30 days to initiate floral buds.
      
   5. Floral induction media-1 (200 µl 2,4-D/L and 200 µl NAA/L supplemented in MS media) results in shoot regeneration following flowering initiation (Figure 1C). But floral induction media-2 (200 µl 2,4-D/L supplemented in MS media) resulted in floral bud initiation without shoot elongation (Figure 1D).
      

Data analysis

The experiment has been repeated thrice independently. All the analysis has been done manually or visually.

Notes

1. Nodal region of the plant should be taken as explants as from the nodal region new callus or branch will develop quickly in comparison with the other parts.
   
2. Hands should be washed and sterilized (with 70% ethanol) properly during the whole experimental process.
   
3. Hormones should be filter sterilized before use.
   
4. Floral induction media should be prepared in the conical flasks or jam bottles instead of Petri plates to get some space for the development of vine shoots.
   
5. Surface sterilization of the explants should not exceed more than 10 min as it may cause tissue damage.
   
6. Light, temperature and humidity should be maintained properly in the culture room.
   
7. If bacterial or fungal contamination is observed on the media surface, the explants should be transferred to new flasks/jam bottles containing fresh media.
   
8. 2,4-D and NAA can also be added before autoclaving of media. But if filter sterilized, it can be added after autoclaving of media. The media need not to be pre-cooled for adding hormones.
   

Recipes

1. MMS media (modified MS media containing basal MS media with vitamins of Gamborg’s media [Gamborg et al., 1968])
1. Weigh 4.4 mg of readily available MS powder
2. Dissolve 4.4 mg of MS powder in 1 L of distilled water. And then add 30 g of sucrose to 1 L of MS solution
3. Add 1 ml of Gamborg’s vitamin solution to 1 L of MS basal solution
4. Adjust pH to 5.8 with 1 N KOH
5. Add 8 g of agar to the media and autoclave for 15 min at 121 °C
   
2. 2,4-D stock solution
   Dissolve 10 mg of 2,4-D in 200 µl of ethanol
   Add 800 µl of distilled water to get 1 ml final volume
   Then filter sterilize.
   
3. NAA stock solution
   Dissolve 10 mg of NAA in 200 µl of 1 N NaOH
   Add 800 µl of distilled water to get 1 ml final volume
   Then filter sterilize
   
4. Floral induction media-1
   Add 2 mg of filter sterilized 2,4-D and 2 mg of NAA to 1 L of MMS media after autoclaving
   
5. Floral induction media-2
   Add 2 mg of filter sterilized 2,4-D to 1 L of MMS media after autoclaving
   
6. HgCl₂ (0.1%)
   Dissolve 0.1 mg HgCl₂ in 100 ml of autoclaved distilled water
   
7. Bavistin solution (1%)
   Dissolve 1 g of Bavistin in 100 ml of autoclaved distilled water
   

Note: All the solutions can be freshly prepared or stored solutions (at 4 °C, stable for 30 days).

Acknowledgments

Authors are thankful to Department of Botany, Utkal University, Govt. of Odisha for the financial support. Authors acknowledge previous work published by Das et al. (2011), from which this protocol is adapted.

References

1. Bakos, Á., Fári, M., Toldi, O. and Lados, M. (1995). Plant regeneration from seedling-derived callus of dodder (Cuscuta trifolii Bab. et Giggs). Plant Sci 109(1): 95-101.
   
2. Baldev, B. (1962). In vitro studies of floral induction on stem apices of Cuscuta reflexa Roxb. - a short-day plant. Ann Bot 26(2): 173-174.
   
3. Das, P., Kar, M. and Sahoo, S. (2011). In vitro hormone-regulated growth and floral induction of Cuscuta reflexa: a parasitic angiosperm. Acta Physiol Plant 33(3): 1031-1035.
   
4. Furuhashi, K. (1991). Establishment of a successive culture of an obligatory parasitic flowering plant, Cuscuta japonica, in vitro. Plant Sci 79(2): 241-246.
   
5. Gamborg, O. L., Miller, R. A. and Ojima, K. (1968). Nutrient requirements of suspension cultures of soybean root cells. Exp Cell Res 50(1): 151-158.
   
6. Hibberd, J. M., Bungard, R. A., Press, M. C., Jeschke, W. D., Scholes, J. D. and Quick, W. P. (1998). Localization of photosynthetic metabolism in the parasitic angiosperm Cuscuta reflexa. Planta 205(4): 506-513.
   
7. Kuijt, J. (1969). Cuscuta, Cassytha, Lenoaceae, and kramereaceae. In: Kuijt, J. (Ed). The Biology of parasitic flowering plants. University of California Press, pp 136-143.
   
8. Maheshwari, P. and Baldev, B. (1961). Artificial production of buds fom the embryos of Cuscuta reflexa. Nature 191: 197-198.
   
9. Murashige, T. and Skoog F. (1962). A revised medium for rapid growth and bioassays with tobacco tissue cultures. Physiol Plant 15(3): 473-497.
   
10. Nun, N. B. and Mayer, A. M. (1999). Culture of pectin methylesterase and polyphenoloxidasein Cuscuta campestris. Phytochemistry 50(5): 719-727.