Materials and Reagents
- Young anthers (at the microspore stage of lily buds normally from 30 to 65 mm of bud length)
 
- Lithium chloride (LiCl) (Merck KGaA, catalog number:  105679  )
 
- Tris-base (United States Biological, catalog number:  75825  )
 
- Ethylenediaminetetraacetic acid (EDTA) (United States Biological, catalog number:  15699  )
 
- Sodium dodecyl sulfate (SDS) (AppliChem, catalog number:  A2263  )
 
- Isoamylalcohol (J.T. Baker®, catalog number:  JT9038-1  )
 
- Phenol (pH 4.0) (United States Biological, catalog number:  77510  )
 
- Chloroform (Merck KGaA, catalog number:  102445  )
 
- Deionized distilled water (ddH2O)
 
- Diethylpyrocarbonate (DEPC) (Sigma-Aldrich, catalog number:  D5758  )
 
- Sodium acetate (NaOAc) (Sigma-Aldrich, catalog number:  S2889  )
 
- Isopropanol (Merck KGaA, catalog number: 107022  )
 
- 75% ethanol (analytical grade)
 
- Liquid nitrogen
 
- 0.1% DEPC ddH2O (RNase-free water) (see Recipes)
 
- Extraction buffer (see Recipes)
 
- 3 M sodium acetate (see Recipes)
 
- 10 mM sodium acetate buffer (see Recipes)
 
- 4 M LiCl (see Recipes)
 
- 75% ethanol (see Recipes)
 
Equipment
- Scalpel 
 
- Tweezers (stainless, length: 11.5 cm; tip: 0.1 mm)
 
- Ceramic mortar and pestle
 
- 1.5 ml Eppendorf
 
- Centrifuge (Eppendorf, model:  5424  )
 
- Fume hood
 
- Speed vacuum (Savant Systems LLC, model:  SC110  )
 
Procedure
- Microspore collection
 - Approximately 25 anthers of young lily buds (3.5 cm) are transversely sliced close to the edge of an anther with a scalpel.
 
- The locular fluid (microspore) is collected in a 1.5 ml Eppendorf        tube containing 200 μl of 10 mM sodium acetate buffer (pH 5.2) from the        cutting site using a tweezer that gently squeezes out the fluid by        moving along the surface of the anther to the cutting side.
 
 Video 1. Separation of Microspore  
 
- Centrifuge at 7,000 rpm (4,600 x g) for 5 min.
 
- Decant the supernatant and the pellet (microspore) in the tube is saved for RNA extraction.
 
 
 
- RNA isolation
 - Immerse the Eppendorf tube that contains the microspore pellet in liquid nitrogen.
 
- Transfer the frozen microspores (0.2 g) into mortar and pestle in liquid nitrogen and grind the sample into powder.
 
- Work in the fume hood. The tissue powder is added by 1 ml of a mix        of hot (~80 °C) extraction buffer/phenol (1:1) and continually ground in        a mortar in liquid nitrogen.
 
- After melting, the solution of sample mixture is transferred to a 1.5 ml Eppendorf tube.
 
- Add 0.2 ml of chloroform/isoamylalcohol (24:1, v/v) into an        Eppendorf tube, close the lid, and hand-shake the tube vigorously for 30        sec. 
 
- Centrifuge the sample at 12,000 rpm (13,500 x g) for 5 min at 4 °C.
 
- Transfer the solution of the upper phase to a new Eppendorf tube and add an equal volume of 4 M LiCl.
 
- Precipitate RNA at -80 °C for 2 h or -20 °C overnight (approximately 16 h) (Note 1).
 
- Centrifuge at 12,000 rpm for 10 min at 4 °C.
 
- Decant the supernatant.
 
- The RNA pellet is dissolved in 0.4 ml of RNase-free water by pipetting up and down for several times.
 
- Add 1/10 volume (40 μl) of 3 M sodium acetate (pH 5.2) and 1 volume (0.4 ml) of isopropanol.
 
- Precipitate RNA at -80 °C for 2 h or -20 °C overnight (approximately 16 h) (Note 1).
 
- Centrifuge at 12,000 rpm for 5 min at 4 °C.
 
- Decant the supernatant.
 
- Wash pellet with 0.6~1 ml of 75% ethanol by pipetting up and down for several times.
 
- Centrifuge at 12,000 rpm for 5 min at 4 °C.
 
- Decant the supernatant.
 
- Shortly dry the RNA pellet by speed vacuum.
 
- Dissolve RNA with an appropriate amount of RNase-free water (usually 20 μl or less) and incubate at 55-60 °C for 10 min.
 
- The RNA sample is stored at -80 °C.
 
Representative data

Figure 1. Total RNA (20 μg) was isolated from microspores isolated from lily flower buds with different lengths. 1. 34-36 mm buds; 2. 44-46 mm buds, both are at the microspore stage and 3. 60-65 mm buds at the transition between microspore and mature pollen. Total RNA was denatured, fractionated on a formaldehyde-agarose gel and stained with ethidium bromide.
Recipes
- 0.1% DEPC ddH2O (RNase-free water)
 1 ml of DEPC is added into 999 ml of ddH2O, mixed at 37 °C for 1 h and autoclaved.
- Extraction buffer                                            100 ml          final conc.
 | 4 M LiCl 
 | 5 ml 
 | 200 mM 
 |  | 1 M Tris-HCl (pH 8.0) 
 | 20 ml 
 | 200 mM 
 |  | 0.5M EDTA 
 | 4 ml 
 | 5 mM 
 |  | 10% SDS 
 | 20 ml 
 | 2% 
 |  | DEPC 
 | ddH2O 
 | 51 ml 
 |  
 
- 3 M sodium acetate (pH 5.2)
 24.61 g of sodium acetate (MW = 82.03) is added into 100 ml of ddH2O, pH is adjusted to 5.2, and autoclaved.
 
- 10 mM sodium acetate buffer (pH 5.2)
 82.03 mg of sodium acetate (MW= 82.03) is added into 100 ml of ddH2O, pH is adjusted to 5.2, and autoclaved.
 
- 4 M LiCl
 16.96 g of LiCl (MW= 42.39) is added into 100 ml of ddH2O and autoclaved.
 
- 75% ethanol
 789.5 ml of 95% ethanol is added into 210.5 ml ddH2O.
 
Notes
- Precipitation of RNA at -20 °C overnight (approximately 16 h) may lead to a better yield of total RNA. However, if yield is not a concern, most RNAs can be precipitated at -20 °C for 2 h.
Acknowledgments
The protocol is an adaption from the protocol of Verwoerd et al. (1989). We greatly appreciate their original contribution.
References
- Liu, M. C., Yang, C. S., Yeh, F. L., Wei, C. H., Jane, W. N., Chung, M. C. and Wang, C. S. (2014). A novel lily anther-specific gene encodes adhesin-like proteins associated with exine formation during anther development. J Exp Bot 65(8): 2023-2037.
 
- Verwoerd, T. C., Dekker, B. M. and Hoekema, A. (1989). A small-scale procedure for the rapid isolation of plant RNAs. Nucleic Acids Res 17(6): 2362. 
 
Article Information
  Copyright
 © 2015 The Authors; exclusive licensee Bio-protocol LLC.
Category
 Plant Science >  Plant biochemistry >  RNA >  RNA extraction  
Plant Science >  Plant physiology >  Tissue analysis  
Molecular Biology >  RNA >  RNA extraction