Things to consider before starting

Choice of BODIPY FL sphingolipids
There are many commercially available BODIPY FL sphingolipid analogs, containing different lengths of fatty acid chains or different substitutions on the BODIPY moiety to modify its spectral properties. A five-carbon fatty acid, 5-(5,7-dimethyl-BODIPY)-1-pentanoic acid, has been previously reported to be the most effective one for most applications (Pagano et al., 2000). Moreover, the spectral properties of C₅-BODIPY lipid analogs are not sensitive to either pH or membrane potential and curvature (Karolin et al., 1994; Chen et al., 1997).
The excitation and emission of bright green-fluorescein generated by the commercially available BODIPY FL dye (Invitrogen) are similar to those of fluorescein (FITC) or Invitrogen Alexa Fluor 488 dye. However, compared with fluorophores Alexa Fluor 488 dye and FITC, BODIPY FL dye has higher extinction coefficient and increased fluorescence quantum yield, and is insensitive to solvent polarity and pH change. Also, due to its hydrophobic properties and long excited-state lifetime (typically, 5 nanoseconds or longer), BODIPY FL dye is very effective in labeling cellular lipids, specifically membrane lipids, and useful for fluorescence polarization-based assays (referred in the commercial product manual of Invitrogen D3522).
Expected subcellular locations of BODIPY FL sphingolipid analogs
The distribution of N-[5-(5,70-dimethyl BODIPY)-1-pentanoyl]-D-erythro-sphingosine (C₅-DMB-Cer), a BODIPY FL ceramide analog, and its metabolites during endocytosis in human skin fibroblast cells has been previously traced (Pagano et al., 1991; Pagano and Chen, 1998). In those cells, this fluorescent lipid analog starts to be integrated into the plasma membrane and is then exclusively present in the outer leaflet of the plasma membrane bilayer at low temperature (commonly, at 4 °C) (Martin and Pagano, 1987; 1994; Chen et al., 1997). During subsequent temperature rising to 37 °C, this lipid analog starts to be internalized into lipid vesicles throughout the cytoplasm (Koval and Pagano, 1989; 1990). The whole internalization process is highly sensitive to low temperature, due to its strict energy dependence.
As soon as the internalization is activated by high temperature incubation, the internalized fluorescent lipid analogs can either return intact (recycle) back to the plasma membrane, or be transported to lysosome storage, and further hydrolyzed by lysosomal sphingolipid hydrolases (Koval and Pagano, 1990; Mayor et al., 1993; Grassi et al., 2019). In this process, in addition to BODIPY FL in the endosomes, BODIPY FL-ceramide resulting from the hydrolysis of BODIPY FL-C₅-DMB-Cer at the plasma membrane are also subsequently transported to the Golgi apparatus, because of its high affinity for ceramides (Pagano, 1990; Rosenwald and Pagano, 1993). Therefore, in mESCs, after the stable state of internalization has been reached upon completion of 30 min incubation at 37 °C, multiple cellular membrane structures—including plasma membrane, Golgi complex, ER, and endosomes—are expected to “lighten up” due to BODIPY fluorescence.
Cell type-specific distribution of BODIPY FL sphingolipid analogs
It is worth noting that different cell types cultured in different media have distinct patterns of sphingolipid metabolism. For instance, ESCs require some specific features to maintain their pluripotency and unique functions (Tanosaki et al., 2021). Therefore, the endocytosis and metabolism of sphingolipids, which can be reflected by the shape, color, and distribution of these lipid analogs and their metabolites in cells, may differ greatly in different cells.

Materials and Reagents

mESC culture
1. Sterile serological pipettes (Serological pipettes of 5 mL, 10 mL, 25 mL and 50 mL; Sarstedt, catalog numbers: 86.1253.001, 86.1254.001, 86.1685.001)
2. Sterile Corning^® centrifuge tubes (50 mL and 15 mL; Millipore, catalog numbers: CLS430290, CLS430055)
3. Falcon^® 5 mL Round Bottom Polystyrene Test Tube (with snap Cap for FACS analysis, Sterile; Falcon, catalog number: 352058)
4. Fisherbrand^TM Class B Amber Glass Threaded Vials (1.8 mL, 3.7 mL, 7.4 mL and16 mL; Fisher Scientific, catalog number: 03-339-23)
5. 6 wells sterile cell culture dishes (Nunc^TM Cell-Culture Treated Multidishes; Thermo Fisher Scientific, catalog number:140675)
6. Nunc^TM Glass Bottom Dishes (Perform high quality imaging in the ease of a 35 mm dish; Thermo Fisher Scientific, catalog number:150682)
7. R1 mESC or ES-E14TG2a (E14) mESC lines (ATCC, catalog number: SCRC-1011, RRID: CVCL_2167; CRL-1821, RRID: CVCL_9108)
8. Gelatin powder (Gelatin from porcine skin; Millipore Sigma, catalog number: G1890)
9. ESGRO Complete Plus Grade medium: a commercially developed serum free complete basal medium. It contains a selective GSK3β inhibitor to enhance viability of mESCs and increase maintenance of the pluripotency (Millipore, catalog number: SF001)
10. Cytiva HyClone Dulbecco's Phosphate Buffered Saline liquid (DPBS buffer; Fisher Scientific, catalog number: SH3002802)
11. Water for cell culture (sterile-filtered, BioReagent, suitable for cell culture; Millipore Sigma, catalog number: W3500)
12. Gibco^TM Trypsin-EDTA (0.05%), phenol red (Sigma-Aldrich, catalog number: 25300054)
13. Trypan Blue Solution, 0.4% (Thermo Fisher Scientific, catalog number: 15250061)
14. 0.1% Gelatin solution (see Recipes)
Preparation of BODIPY FL-sphingomyelin stock and working solutions
1. BODIPY^TM FL C₅-Sphingomyelin (Invitrogen, catalog number: D3522)
2. Defatted bovine serum albumin (BSA; Roche, catalog number: 03117057001)
3. Hanks’ Balanced Salt solution (HBSS buffer solution; HBSS, no calcium, no magnesium, no phenol red; Gibco, catalog number: 14175095)
4. HEPES solution (1 M N-2-Hydroxyethylpiperazine-N′-2-ethane sulfonic acid in H₂O, Gibco, catalog number: 15630106)
5. Chloroform (anhydrous, ≥99%, contains 0.5–1.0% ethanol as stabilizer; Millipore Sigma, catalog number: 288306)
6. Ethyl alcohol (Absolute alcohol, 200 proof anhydrous CAS#64-17-5; The Warner Graham Company)
7. 70% ethanol (see Recipes)
8. Chloroform:ethanol (19:1 v/v) (see Recipes)
9. HBSS/HEPES buffer (pH7.4) (see Recipes)

Equipment

Cell counter (Countess 3 Automated Cell Counter; Thermo Fisher)
Analytical Nitrogen Evaporator (24 Position N-EVAP Nitrogen Evaporator; Organomation Associate, Inc; model: N-EVAPTM 112 #11250)
Forma series 3 water jacketed CO₂ incubator (Thermo Fisher)
Avanti J-15R Centrifuge with GH-3.8/GH-3.8A rotor (Beckman Coulter)
Mini Vortex Mixer (Variable Speed) (Fisher Scientific)
Refrigerator (Whirlpool)
Zeiss LSM 780 UV inverted confocal microscope with AiryScan (Carl Zeiss Sports Optics, model: LSM 780)
Fluorescence-Activated Cell Sorting flow cytometer (BD Bioscience, Brand, model: BD LSRFortessa with HTS option)

Software

Zeiss Zen (Carl Zeiss Sports Optics, web address: https://www.binran.ru/files/ckp/fluorestsentnaya-mikroskopiya/CKP_LSM780_ZEN2010_Manual_ENG.pdf)
BDFACSDiva^TM software version 8.0.1 (BD Bioscience, web address: https://www.bdbiosciences.com/en-us/products/software/instrument-software/bd-facsdiva-software)

Procedures

Plate and culture mESCs
1. Dissolve gelatin powder in cell culture-grade water to the final concentration of 0.1% (w/v), then sterilize this solution by autoclave.
2. Apply an appropriate amount of 0.1% gelatin solution to cover the entire surface area of cell culture dishes, then incubate the dishes at room temperature (RT) for 30 min to coat the cell growth area.
3. After incubation, aspirate the gelatin solution and wash the coated cell culture dishes with PBS solution twice for 3 min each time, to completely remove the residual gelatin solution.
  Note: All above procedures (2–3) must be performed in a sterile hood. The resulting gelatin-coated dishes will be set aside in PBS solution for fresh cell plating. They can also be dried then kept at RT for up to 1 month for future use (after rehydration with PBS solution).
4. Completely disassociate pre-cultured mESCs, by adding an appropriate amount of 0.05% trypsin (e.g., an approximate volume of 300 µL for each well of the 6-well plate) to cover the entire cell growth area, then incubate at 37 °C for 3 min. After cells are completely disassociated from dishes, wash them twice with 30 mL of PBS solution in 50-mL Corning tubes, to completely remove residual trypsin. Harvest cells by centrifugation at 300 × g for 3 min.
  Note: mESC colonies must be completely disassociated with 0.05% trypsin (extra amount of trypsin and extended digestion time may be applied) to ensure all cells are evenly dispersed in cell suspension before re-plating. Failure to complete dissociate cells could induce differentiation of mESCs, and/or formation of big cell clumps that interfere with subsequent analyses.
5. Resuspend mESCs with the ESGRO growth medium, and plate cells on gelatin-coated 6-well cell culture plates for FACS analysis, or Nunc^TM Glass Bottom Dishes for CLSM visualization, at the density of approximately 5 × 10⁴ cells/cm². Incubate cells in a cell culture incubator at 37 °C with 95% humidity and 5% CO₂. Cells will be stained with BODIPY FL-sphingomyelin analogs after their attachment to dishes, or after overnight incubation.
  Note: mESCs are very sensitive to environmental perturbations, including chemical and physical stresses. Even very minor agitations may result in apoptosis, differentiation, or morphological changes of mESCs. Therefore, cell culture procedures must be performed in an extraordinarily careful and gentle manner.
Prepare the stock and working solutions of BODIPY FL C₅-sphingomyelin analogs
1. Stock solution: Mix absolute chloroform and absolute ethanol at a ratio of 19:1 (v/v) (Recipe 3) inside a chemical safety cabinet. To prepare 1 mM BODIPY FL C₅-sphingomyelin stock solution, directly inject an appropriate amount of the prepared chloroform/ethanol solvent into the original product vial containing the BODIPY FL C₅-sphingomyelin powder. Shake vials until all powders are completely dissolved in the solvent, then transfer the 1 mM stock solution to amber glass round vials. This stock solution must be stored at -20 °C and strictly protected from light.
2. Working solution:
  1. Dispense 50 µL of 1 mM BODIPY FL C₅-sphingomyelin stock solution from step B1 into an amber glass round vial. Evaporate the organic solvent under a stream of nitrogen, by placing the nozzle (like a needle) of the nitrogen evaporator into the mouth of the amber glass round vial, and spraying the nitrogen gas toward the stock solution, until no liquid phase is observed. After the liquid phase has been completely dried off, add 200 µL of absolute ethanol into the amber glass round vial, to reconstitute the dried BODIPY FL C₅-sphingomyelin powder.
  2. To prepare 5 µM defatted BSA solution, dissolve an appropriate amount of defatted BSA into 10 mL of Hanks’ buffered salt solution containing 10 mM HEPES (HBSS/HEPES buffer, Recipe 4).
  3. Add the prepared 200 μL of BODIPY FL C₅-sphingomyelin solution in ethanol from step B2a into the 10 mL of 5µM fatty acid-free BSA solution from step B2b, and mix properly on a vortex mixer to generate the working solution (5 μM BODIPY FL-sphingomyelin + 5 μM BSA). Store the working solution at -20 °C, with strict protection from light.
    Note: The purpose of defatted BSA in the working solution is to remove all residual pools of fluorescent lipid analogs, which will remain on the surface of plasma membranes after internalization of membrane-inserted lipid analogs, by “back-exchange” effects (Kok et al., 1989; Abreu et al., 2003).
Stain mESCs with the working solution of BODIPY FL C₅-sphingolipid analogs for confocal imaging analysis
1. Remove all ESGRO growth medium from the overnight cell culture dishes and wash adherent cells three times with HBSS/HEPES buffer at RT, to remove residual ESGRO growth medium and floating dead cells. Apply sufficient working solution (prepared from the previous step) into cell culture dishes to completely cover the entire area where cells grow and incubate cells at 4 °C for 30 min with strict protection from light. The negative control sample will be incubated with the HBSS/HEPES buffer instead of BODIPY FL C₅-sphingolipid working solution in this step.
  Note: During the washing step, PBS solution should be added against the side of the well instead of directly on the top of cells, so that cells will not be dislodged. The healthy mESCs are able to attach to gelatin-coated cell culture dishes. The majority of the cells dislodged during washing are dead or apoptotic cells and must be discarded.
2. After 30 min incubation at 4 °C, completely remove all working solution and wash cells three times with ice-cold ESGRO growth medium. After washing, add adequate fresh RT ESGRO growth medium to cover the cells, and incubate cells in an incubator at 37 °C, 95% humidity, and 5% CO₂ for 30 min. Strictly protect the incubation from light.
3. Wash cells with fresh ESGRO growth medium at RT. Stained cells on glass bottom dishes will be directly examined and imaged with the Zeiss LSM 780 UV confocal microscope.
  Note: Cells can also be counter-stained with other dyes, such as nuclei staining with DAPI or DRQA5 (Fan et al., 2021).
4. The dynamic of BODIPY FL-sphingomyelins in stained mESCs will be analyzed using a Zeiss LSM 780 UV inverted confocal microscope equipped with a cell culture chamber that provides appropriate cell growth conditions (e.g., 37 °C, 95% humidity, and 5% CO₂). Time-lapse images of stained mESCs are acquired every 5 min for up to 12 h. An example of the dynamic of BODIPY FL-sphingomyelins in mESCs can be found in our original research article (Fan et al., 2021).
Analyze mESCs stained with BODIPY FL C₅-sphingolipid analogs by FACS
1. After incubation at 37 °C, as described in step C2, wash cells with HBSS/HEPES buffer three times, to completely remove the ESGRO growth medium. Completely disassociate mESCs cells by adding an appropriate amount of 0.05% trypsin (approximately 300–500 µL for each well of the 6-well plate), then incubating at 37 °C for 3 min. Wash cells twice with 30 mL of HBSS/HEPES buffer in 50-mL Corning tubes to completely remove residual trypsin and harvest cells by centrifuging at 300 × g for 3 min.
  Note: Extra amount of trypsin and extended digestion time can be applied for this step to complete dissociate large mESC colonies and prevent formation of cell clumps.
2. Discard the supernatant and resuspend the cell pellets in 1 mL of HBSS/HEPES buffer, then transfer the cells into 5-mL round bottom polystyrene test tubes for FACS analysis.
  Note: Samples must be strictly protected from light in the two steps above.
3. The parameters setup for visualization and quantification analysis by BD LSRFortessa FACS are based on the spectral characteristics of the BODIPY FL-sphingolipid described in Table 1.
  
  Table 1. Spectral characteristics of BODIPY FL-sphingolipid (recommended in the manual of Molecular Probes)
  Label Absorption/Emission (nm) Optical Filter
  BODIPY FL 505/511 Omega/Chroma
  XF26, XF115/71010,41012

Data analysis

Confocal imaging analysis: the concentration of BODIPY FL-sphingolipid in cellular membranes can be determined from the confocal images based on their spectral properties. Generally, when excited with λ_ex= 488 nm, cell organelles or regions containing high levels of BODIPY FL-sphingolipid analogs fluoresce red (λ_em ≥ 590 nm), while cell organelles or regions containing low levels of BODIPY FL-sphingolipid analogs fluoresce green (λ_em= 520–590) (Figure 3). Therefore, the concentration of BODIPY FL-sphingolipid analogs in cellular membranes can be estimated by quantifying the ratio of green to red fluorescence from microscopic images (Pagano et al., 1991; Chen et al., 1997). This method has been previously applied to estimate the concentration of BODIPY FL-lipid analogs in membranes of various cell types (Pagano and Chen, 1998; Marks et al., 2008). Please note that, when cultured in defined serum free medium, BODIPY FL-sphingomyelin stained mESCs only emit green fluorescence, as shown in our original research article (Fan et al., 2021).

Figure 3. Schematic illustration of the image acquisition process using the Zeiss LSM 780 inverted confocal microscope
FACS data analysis: the FACS data from mESCs stained with BOPDIPY FL C₅-sphingomyelin analogs are exported to BDFACSDiva^TM software (version 8.0.1) for further analysis (Figure 4). All stained cells are initially gated by plotting forward scatter height (FSC-H) versus forward scatter area (FSC-A), to exclude doublets, then by plotting side scatter area (SSC-A) versus FSC-A to exclude the debris in the cell population. This gating strategy results in a population of “monodispersed state” single cells (Figure 4: the two plots on top of A and B). Next, the single parameter histogram of cell counts versus FSC-A is used to identify and gate the cell population carrying positive BODIPY fluorescence (FITC-A) after the comparison between positive sample (Figure 4B, the two middle plots) and negative control (Figure 4A, the two middle plots). Finally, the average FITC intensity of all counted single cells is calculated (Figure 4A and 4B, plots and tables in the bottom). The relative BODIPY fluorescence is calculated by normalizing the average intensity reading of each group against the wild-type (WT) group. Values are expressed as mean fluorescent intensity (MFI) ± standard error of mean from at least three independent experiments or biological replicates.

Figure 4. Determination of fluorescence intensity in mESCs stained with BODIPY FL C₅-sphingomyelin by FACS. Data is analyzed with BDFACSDiva^TM software version 8.0.1. for (A) unstained negative control and (B) stained positive mESCs.

Recipes

0.1% Gelatin solution
Reagent Final concentration Amount
Gelatin (powder) 0.1%(W/V) 1 g
H₂O n/a 1,000 mL
Total n/a 1,000 mL
70% ethanol
Reagent Final concentration Amount
Ethanol (absolute) 70% 700 mL
H₂O n/a 300 mL
Total n/a 1,000 mL
Chloroform:ethanol (19:1 v/v)
Reagent Final concentration Amount
Chloroform (absolute) 95% 0.95 mL
Ethanol 5% 0.05 mL
Total n/a 1 mL
HBSS/HEPES buffer (pH 7.4)
Reagent Final concentration Amount
HBSS 1× 495 mL
HEPES buffer 10 mM 5 mL
Total n/a 500 mL

Acknowledgments

We thank Dr. Carl Bortner and Mr. Jeff Tucker for critical reading of the manuscript. The authors also thank Yolanda L. Jones, National Institutes of Health Library, for editing assistance. The research related to this work was supported by the Intramural Research Program of National Institute of Environmental Health Sciences of the NIH Z01 ES102205 (to X. L.).

Fan, W., Tang, S., Fan, X., Fang, Y., Xu, X., Li, L., Xu, J., Li, J. L., Wang, Z. and Li, X. (2021). SIRT1 regulates sphingolipid metabolism and neural differentiation of mouse embryonic stem cells through c-Myc-SMPDL3B. Elife 10: e67452. doi: https://doi.org/10.7554/eLife.67452.

Competing interests

The authors declare that no competing interests exist.

References

Abreu, M. S., Estronca, L. M., Moreno, M. J. and Vaz, W. L. (2003). Binding of a fluorescent lipid amphiphile to albumin and its transfer to lipid bilayer membranes. Biophys J 84(1): 386-399.
Alessenko, A. V. and Albi, E. (2020). Exploring Sphingolipid Implications in Neurodegeneration. Front Neurol 11: 437.
Bienias, K., Fiedorowicz, A., Sadowska, A., Prokopiuk, S. and Car, H. (2016). Regulation of sphingomyelin metabolism. Pharmacol Rep 68(3): 570-581.
Chattopadhyay, A. and London, E. (1987). Parallax method for direct measurement of membrane penetration depth utilizing fluorescence quenching by spin-labeled phospholipids. Biochemistry 26(1): 39-45.
Chen, C. S., Martin, O. C. and Pagano, R. E. (1997). Changes in the spectral properties of a plasma membrane lipid analog during the first seconds of endocytosis in living cells. Biophys J 72(1): 37-50.
Fan, W., Tang, S., Fan, X., Fang, Y., Xu, X., Li, L., Xu, J., Li, J. L., Wang, Z. and Li, X. (2021). SIRT1 regulates sphingolipid metabolism and neural differentiation of mouse embryonic stem cells through c-Myc-SMPDL3B. Elife 10: e67452.
Gault, C. R., Obeid, L. M. and Hannun, Y. A. (2010). An overview of sphingolipid metabolism: from synthesis to breakdown. Adv Exp Med Biol 688: 1-23.
Grassi, S., Chiricozzi, E., Mauri, L., Sonnino, S. and Prinetti, A. (2019). Sphingolipids and neuronal degeneration in lysosomal storage disorders. J Neurochem 148(5): 600-611.
Heinz, L. X., Baumann, C. L., Koberlin, M. S., Snijder, B., Gawish, R., Shui, G., Sharif, O., Aspalter, I. M., Muller, A. C., Kandasamy, R. K., et al. (2015). The Lipid-Modifying Enzyme SMPDL3B Negatively Regulates Innate Immunity. Cell Rep 11(12): 1919-1928.
Hoekstra, D. and Kok, J. W. (1992). Trafficking of glycosphingolipids in eukaryotic cells; sorting and recycling of lipids. Biochim Biophys Acta 1113(3-4): 277-294.
Johnson, I. D., Kang, H. C. and Haugland, R. P. (1991). Fluorescent membrane probes incorporating dipyrrometheneboron difluoride fluorophores. Anal Biochem 198(2): 228-237.
Karolin, J., Johansson, L. B. A., Strandberg, L. and Ny, T. (1994). Fluorescence and Absorption Spectroscopic Properties of Dipyrrometheneboron Difluoride (Bodipy) Derivatives in Liquids, Lipid-Membranes, and Proteins. J Am Chem Soc 116(17): 7801-7806.
Kok, J. W., Eskelinen, S., Hoekstra, K. and Hoekstra, D. (1989). Salvage of glucosylceramide by recycling after internalization along the pathway of receptor-mediated endocytosis. Proc Natl Acad Sci U S A 86(24): 9896-9900.
Koval, M. and Pagano, R. E. (1989). Lipid recycling between the plasma membrane and intracellular compartments: transport and metabolism of fluorescent sphingomyelin analogues in cultured fibroblasts. J Cell Biol 108(6): 2169-2181.
Koval, M. and Pagano, R. E. (1990). Sorting of an internalized plasma membrane lipid between recycling and degradative pathways in normal and Niemann-Pick, type A fibroblasts. J Cell Biol 111(2): 429-442.
Koval, M. and Pagano, R. E. (1991). Intracellular transport and metabolism of sphingomyelin. Biochim Biophys Acta 1082(2): 113-125.
Laude, A. J. and Prior, I. A. (2004). Plasma membrane microdomains: organization, function and trafficking. Mol Membr Biol 21(3): 193-205.
Marks, D. L., Bittman, R. and Pagano, R. E. (2008). Use of Bodipy-labeled sphingolipid and cholesterol analogs to examine membrane microdomains in cells. Histochem Cell Biol 130(5): 819-832.
Martin, O. C. and Pagano, R. E. (1987). Transbilayer movement of fluorescent analogs of phosphatidylserine and phosphatidylethanolamine at the plasma membrane of cultured cells. Evidence for a protein-mediated and ATP-dependent process(es). J Biol Chem 262(12): 5890-5898.
Martin, O. C. and Pagano, R. E. (1994). Internalization and sorting of a fluorescent analogue of glucosylceramide to the Golgi apparatus of human skin fibroblasts: utilization of endocytic and nonendocytic transport mechanisms. J Cell Biol 125(4): 769-781.
Mayor, S., Presley, J. F. and Maxfield, F. R. (1993). Sorting of membrane components from endosomes and subsequent recycling to the cell surface occurs by a bulk flow process. J Cell Biol 121(6): 1257-1269.
Pagano, R. E. (1990). The Golgi apparatus: insights from lipid biochemistry. Biochem Soc Trans 18(3): 361-366.
Pagano, R. E. and Chen, C. S. (1998). Use of BODIPY-labeled sphingolipids to study membrane traffic along the endocytic pathway. Ann Ny Acad Sci 845: 152-160.
Pagano, R. E., Martin, O. C., Kang, H. C. and Haugland, R. P. (1991). A novel fluorescent ceramide analogue for studying membrane traffic in animal cells: accumulation at the Golgi apparatus results in altered spectral properties of the sphingolipid precursor. J Cell Biol 113(6): 1267-1279.
Pagano, R. E., Watanabe, R., Wheatley, C. and Dominguez, M. (2000). Applications of BODIPY-sphingolipid analogs to study lipid traffic and metabolism in cells. Methods Enzymol 312: 523-534.
Rosenwald, A. G. and Pagano, R. E. (1993). Intracellular transport of ceramide and its metabolites at the Golgi complex: insights from short-chain analogs. Adv Lipid Res 26: 101-118.
Schnaar, R. L. and Kinoshita, T. (2015). Glycosphingolipids. (3^rd edition). In: Varki, A., Cummings, R. D., Esko, J. D., Stanley, P., Hart, G. W., Aebi, M., Darvill, A. G., Kinoshita, T., Packer, N. H., Prestegard, J. H., et al. (Eds.) Essentials of Glycobiology. 125-135.
Tanosaki, S., Tohyama, S., Kishino, Y., Fujita, J. and Fukuda, K. (2021). Metabolism of human pluripotent stem cells and differentiated cells for regenerative therapy: a focus on cardiomyocytes. Inflamm Regen 41(1): 5.
Wolf, D. E., Winiski, A. P., Ting, A. E., Bocian, K. M. and Pagano, R. E. (1992). Determination of the transbilayer distribution of fluorescent lipid analogues by nonradiative fluorescence resonance energy transfer. Biochemistry 31(11): 2865-2873.