Improve Research Reproducibility A Bio-protocol resource
Concise Method
tooltip

2.5. Filtration Test

SM Sri Mulyati
SM Syawaliah Muchtar
NA Nasrul Arahman
YS Yanna Syamsuddin
NN Normi Izati Mat Nawi
NH Noorfidza Yub Harun
MB Muhammad Roil Bilad
YF Yuliar Firdaus
RT Ryosuke Takagi
HM Hideto Matsuyama
ask Ask a question
Favorite

The filtration tests were conducted using a UF cell at a pressure of 1.5 bar. This experiment was done using two feeds (DI water and 50 ppm HA solution) to evaluate the performance of membranes in terms of pure water flux (PWF), HA solution flux, and rejection of HA solution. This experiment’s procedure was carried out in one set by changing feed from DI water to HA solution followed by membrane cleaning. It continued with replacing the feed with DI water again to obtain the data for antifouling assessment. The detailed information on this experimental procedure has been described in our earlier works [28].

Copyright and License information:  ©2020 by the authors.
Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).

Do you have any questions about this protocol?

Post your question to gather feedback from the community. We will also invite the authors of this article to respond.

post Post a Question
0 Q&A