Improve Research Reproducibility A Bio-protocol resource
Concise Method
tooltip

Dyeing

RY Rong Yang
YZ Yu Zhang
SR Sailesh Ranjitkar
ML Mingxiang Li
YG Yongjie Guo
XY Xiuxiang Yan
CW Chuanfa Wang
JS John Richard Stepp
LY Lixin Yang
request Request a Protocol
ask Ask a question
Favorite

4% madder was used to dye cotton (weight 118.7 g m−2, plain weave) and hemp (weight 149.1 g m−2, plain weave) fabrics at 80 °C for 30 min with a bath ratio of 30:1 with a laboratory method. After dyeing, the dyed samples were rinsed with tap water and dried at room temperature. This dyeing process was based on Monpa traditional madder dyeing practices derived through field interviews.

Copyright and License information: The Author(s) ©2021
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Do you have any questions about this protocol?

Post your question to gather feedback from the community. We will also invite the authors of this article to respond.

0/150

tip Tips for asking effective questions

+ Description

Write a detailed description. Include all information that will help others answer your question including experimental processes, conditions, and relevant images.

post Post a Question
0 Q&A