Materials and Reagents

For animal perfusion:

1. 12-well plates (Falcon, catalog number: 353043 )

2. Needles, syringes

   1. Butterfly needles:

      Winged Infusion Set: 25 G 0.50 x 19mm + 30 cm tubing (Braun, catalog number: 4056370 )

      Winged Infusion Set: 21 G 0.80 x 19mm + 30 cm tubing (Braun, catalog number: 4056337 )

   2. Hypodermic needles:

      18 G (Terumo Neolus, catalog number: NN-1838R)

      21 G (Terumo Neolus, catalog number: NN-2138R )

      25 G (Terumo Neolus, catalog number: NN-2516R )

      30 G (BD Microlance 3, catalog number: 304000 )

   3. Syringes without needle:

      20 ml (Terumo, catalog number: SS+20ES 1)

      50 ml (Terumo, catalog number: SS+50ES1 )

   4. Syringes with needle:

      U-100 Insulin syringe, 0.5 ml 0.33 mm (29G) (Fisher Scientific, BD Medical, catalog number: 324892 )

3. Ketamine

4. Xylazine

5. Paraformaldehyde (PFA) (Sigma-Aldrich, catalog number: P6148-1KG , Lot: MKCD5277)

6. Phosphate Buffer Saline (PBS) (Gibco, catalog number: 14190-094 ) or homemade PBS (Recipe below)

7. Sodium chloride (VWR, AnalaR Normapur, catalog number: 27810.295 )

8. Potassium chloride (Merck Millipore, catalog number: 1.04936.1000 )

9. Sodium phosphate dibasic heptahydrate (Sigma-Aldrich, catalog number: S9390-2.5KG )

10. Potassium dihydrogen phosphate (Merck Millipore, catalog number: 1.04873.1000 )

11. 4% PFA (see Recipes)

12. 1x PBS (see Recipes)

    
    

Tissue sample fixation and washing:

1. 12-well plates (Falcon, catalog number: 353043 )

2. Paraformaldehyde (PFA) (Sigma-Aldrich, catalog number: P6148-1KG , Lot #MKCD5277)

3. Phosphate Buffer Saline (PBS) (Gibco, catalog number: 14190-094 ) or homemade PBS (Recipe below)

4. Sodium Azide (Sigma-Aldrich, catalog number: S8032-100G, Lot #0001453190 )

5. 4% PFA (see Recipes)

6. 1x PBS (see Recipes)

Embedding in agar for thick vibratome sections:

1. 12-well plates (Falcon, catalog number: 353043 )

2. Select Agar ≥ 99.5% (GC) (Sigma-Aldrich, catalog number: S5054-250G, Lot #MKCB2702V )

3. Phosphate Buffer Saline (PBS) (Gibco, catalog number: 14190-094 ) or homemade PBS (Recipe below)

4. 4% Agar (see Recipes)

Cryopreservation and Freezing for thin cryostat sections:

1. 6 cm Petri dish

2. Optimal cutting medium (OCT) (Leica Tissue Freezing Medium, catalog number: 14020108926 )

3. Dry ice

4. Sucrose (Sigma-Aldrich, catalog number: S9378-1KG , Lot #BCBS5325V)

5. Phosphate Buffer Saline (PBS) (Gibco, catalog number: 14190-094 ) or homemade PBS (Recipe below)

6. 1x PBS (see Recipes)

7. 10, 20 and 30% sucrose (see Recipes)

Vibratome sectioning (thick sections):

1. 12-well plates (Falcon, catalog number: 353043 )

2. Blades (Gillette "Bleue Extra")

3. Phosphate Buffer Saline (PBS) (Gibco, catalog number: 14190-094 ) or homemade PBS (Recipe below)

4. Glue (Henkel, Loctite superglue-3 )

5. 1x PBS (see Recipes)

Immunofluorescence on thick vibratome sections:

1. 12-well plates (Falcon, catalog number: 353043 )

2. Slides (Thermo Scientific, Superfrost Plus: J1800AMNZ , Lot #0180)

3. Cover slips (Dia path, catalog number: 0 61061 )

4. Nail polish

5. Phosphate Buffer Saline (PBS) (Gibco, catalog number: 14190-094 ) or homemade PBS (Recipe below)

6. Goat serum (GS) (Thermo Fisher scientific, Gibco, catalog number: 16210-064 , Lot #16711329)

7. Newborn calf serum (NBCS) (Thermo Fisher scientific, Gibco, catalog number: 16010-167 )

8. Bovine serum albumin (BSA) (Sigma-Aldrich, catalog number: A-4503 or A7906-50G , Lot #SLBX7550)

9. Triton (Sigma-Aldrich, catalog number: T8787-250ML , Lot #SLBV4122))

10. N-propyl Gallate (Sigma-Aldrich, catalog number: P3130-100G , Lot #SLBD6728V)

11. Glycerol (VWR Chemicals, catalog number: 24388.295 , Batch: 14E050030)

12. Hoechst 33342, Trihydrochloride (Invitrogen, catalog number: H3570 , Lot #1116437)

13. Primary antibodies, example:

    1. Nr2f1/COUP-TFI (Abcam, catalog number: ab181137 or R&D, catalog number: H8132 )

    2. Ctip2 (Abcam, catalog number: ab18465 )

    3. Satb2 (Abcam, catalog number: ab51502 )

14. Secondary antibodies, Example: Alexa Fluor 488, 555, 594 and 647 anti-mouse or anti-rabbit IgG conjugates (Thermo Fisher scientific)

15. Blocking Solution (see Recipes)

16. Antibody Solution (see Recipes)

17. Mounting medium (see Recipes)

18. Antibody Solution for vibratome thick sections (see Recipes)

    
    

Cryostat sectioning (thin sections):

1. Slides (Thermo Scientific, Superfrost Plus: J1800AMNZ , Lot #0180)

2. Blades (Thermo Fisher scientific, Edge-Rite: 4280L )

3. Optimal cutting medium (OCT) (Leica Tissue Freezing Medium, 14020108926 )

Immunofluorescence on thin cryostat sections:

1. Coverslips (Dia Path, catalog number: 0 61061 )

2. Phosphate Buffer Saline (PBS) (Gibco, catalog number: 14190-094 ) or homemade PBS (Recipe below)

3. Distilled water

4. Trisodium Citrate Dihydrate (Sigma-Aldrich, catalog number: S1804-1KG , Lot #BCBF5684V)

5. Citric acid (Sigma-Aldrich, catalog number: C-0759 , Lot #34H1314)

6. Goat serum (GS) (Thermo Fisher scientific, Gibco, catalog number: 16210-064 , Lot #16711329)

7. New-born calf serum (NBCS) (Thermo Fisher scientific, Gibco, catalog number: 16010-167 )

8. Triton (Sigma-Aldrich, catalog number: T8787-250ML , Lot #SLBV4122)

9. N-propyl Gallate (Sigma-Aldrich, catalog number: P3130-100G ; Lot #SLBD6728V)

10. Glycerol (VWR Chemicals, catalog number: 24388.295 ; Batch 14E050030)

11. Hoechst 33342, Trihydrochloride (Invitrogen, catalog number: H3570 ; Lot #1116437)

12. Primary antibodies, example:

    1. Nr2f1/COUP-TFI (Abcam, catalog number: ab181137 or R&D, catalog number: H8132 )

    2. Ctip2 (Abcam, catalog number: ab18465 )

    3. Satb2 (Abcam, catalog number: ab51502 )

    4. Sox5 (Abcam, catalog number: ab94396 )

    5. GFP (Thermo Fisher scientific, catalog number: A-11122 ; or: Abcam, catalog number: ab13970 )

    6. Ski (Santa Cruz, catalog number: sc-9140 )

    7. For other antibodies, see “Materials and Methods” in Harb et al. (2016).

13. Secondary antibodies, Example: Alexa Fluor 488, 555, 594 and 647 anti-mouse or anti-rabbit IgG conjugates (Thermo Fisher Scientific)

14. Unmasking Solution (see Recipes)

15. Blocking Solution (see Recipes)

16. Antibody Solution (see Recipes)

Equipment

1. Scissors, forceps, dissection and tissue handling tools

   1. Sharp scissors (Holtex, model: IC12411 )

   2. Fine scissors (Fine Science Tool, catalog number: 14060-11 )

   3. 45° angled tip forceps (Fine Science Tool, model: Dumont #5, catalog number: 11251-35)

   4. Straight tip forceps (Fine Science Tool, Dumont Mini Forceps – Style 5)

   5. Double-ended micro spatula (Fine Science Tool, catalog number: 10091-12 )

   6. Perforated spoon (WPI, catalog number: 501997 )

2. Microwave

3. Embedding moulds:

   Peel-A-Way^® embedding moulds (Sigma-Aldrich, catalog number: E6032-1CS )

   Peel-A-Way^® Disposable Embedding Moulds (VWR Polysciences, catalog number: 18646A-1 )

4. Brush

5. Boxes for storage (Dutscher, catalog number: 0 37516 )

6. Glass (Leica, Insert Glass 70 mm, catalog number: 14047742497 )

7. Boxes for boiling (Tissue-Tek^® Staining Dish, Sakura, catalog number: 4456 )

8. Vertical boxes for slides wash (Fisher Scientific, Fisherbrand 5-place slide mailer: HS15986 )

9. Shaker (Stuart 3D gyratory rocker, catalog number: SSL3 )

10. Horizontal Microscope slide boxes (Kartell Labware, #276 [98 mm x 83 mm], #277 [230 mm x 97 mm] and #278 [230 mm x 180 mm])

11. pH meter (Fisher Scientific, model: accumet AE150 )

12. Cryostat (Leica, model: CM3050S )

13. Vibratome (Leica, model: VT1000S )

14. Microscope (Leica, model: DM6000B +CTR6000 )

15. Confocal microscope (Zeiss, model: LSM 710, 2012 )

16. Water bath (Fisher Scientific, catalog number: Polystat 24, +5L/8662F )

Software

1. Adobe Photoshop CS (CS5 Extended, Version 12.0 x32)

2. Microsoft Excel (2005 Version)

3. GraphPad Prism (Version 7.00)

4. Zen software for confocal images (Zen Black, Version 11 SP3 HF88.1.8.484)

5. Leica Microsystem CMS Gmbh LASX (Version: 3.3.3.16958)

Procedure

1. Mouse Brain Collection and Fixation

   1. Anesthetize the mouse with an intra-peritoneal injection of Ketamine/Xylazine mix (100 mg/kg Ketamine mixed with 10 mg/kg Xylazine in isotonic saline solution; contact local animal ethical committee for drug use and animal procedures). In our case, all mouse experiments were conducted in accordance with relevant national and international guidelines (European Union rules; 2010/63/UE), and have been approved by the local ethical committee in France (CIEPAL NCE/2014-209 and NCE/2019-548).

   2. For postnatal/adult mice, perfuse them intracardially with 4% PFA; for embryonic stages, recover embryos on ice-cold PBS from the uterus of the anesthetized mother.

   3. Decapitate adults/embryos and dissect the brains; for early stage embryos (embryonic age < 15.5 days), brain dissection is not mandatory, but highly recommended to reduce background signal on skin and other tissues surrounding the brain.

   4. Keep brains in ice-cold PBS in 12-well plates during and after collection.

   5. Post-fix brains for 2 h in 4% PFA at 4 °C (gentle agitation on shaker).

   6. Wash the brains 3 times for 10 min each in PBS at 4 °C (on shaker).

   7. Store brains at 4 °C until further treatment (few days); for long-term storage (few weeks), supplement PBS with 0.05% Sodium Azide.

      
      

2. Embedding in Agar for vibratome sectioning (thick sections: 50-200 μm)

   1. Prepare a solution of 4% agar in PBS.

   2. Boil in the microwave until homogenization.

   3. Keep the 4% agar in a water bath at 50 °C.

   4. Add 4% agar to a 12-well plate.

   5. Remove the brain from PBS with perforated spoon and dry it on a paper towel.

   6. Quickly immerge the brain in agar and correctly position it with forceps before agar polymerization.

   7. Store the brain at 4 °C for short term or immediately proceed with sectioning.

      
      

3. Cutting vibratome thick sections

   1. Trim the agar surrounding the brain and fix it on the vibratome with glue.

   2. Add ice cold PBS to the vibratome and keep it cold by adding ice around the mould for cutting.

   3. Cut 50-200 μm thick sections.

   4. Use a brush to gently collect the sections from the vibratome before moving them to a 12-well plate; keep the plate on ice-cold PBS.

   5. Create series of sections representing the whole cortex or brain by distributing similar sections on subsequent wells.

   6. You can add up to 3-4 sections in each well.

      
      

4. Immunostaining on vibratome sections (50-200 μm)

   1. Remove the PBS by carefully aspirating it with a pipette tip, without touching the sections (repeat for following passages).

   2. Incubate the sections in Blocking solution (10% GS, 3% BSA, 0.3% Triton) over-night (O/N) at 4 °C by adding 1 ml for each well.

   3. The following day add 500 μl of primary antibodies by diluting them to the appropriate concentration with the antibody solution (3% GS, 3% BSA, 0.3% Triton).

   4. Incubate the sections with primary antibodies O/N at 4 °C.

   5. The day after, wash the sections 3 times for 1 h each in PBS, followed by 3 short washes for 10 min each in PBS (all washes are performed at room temperature (RT), on shaker).

   6. Prepare secondary antibodies by diluting them to 1/500 in the antibody solution (3% GS, 3% BSA, 0.3% Triton).

   7. Incubate the sections with 500 μl of diluted secondary antibodies O/N at 4 °C by shaking.

   8. The following day wash the sections in PBS as described in Step D5.

   9. Incubate the sections in 1 μg/ml Hoechst in PBS for 1 h.

   10. Carefully move the sections using a brush from the wells to a slide covered with PBS.

   11. Aspirate the PBS with a pipette tip and let the sections dry.

   12. Add 3 drops of mounting solution (80% glycerol, 2% N-propyl gallate, 1 μg/ml Hoechst) to each slide.

   13. Cover the slides with cover slips and seal the edges with nail polish.

   14. Leave the nail polish to dry for 5 min at RT.

   15. Store the slides until imaging at -20 °C.

       
       

5. Cryopreservation and Freezing brains for thin sectioning at the cryostat (thin sections: 10-20 μm)

   1. Prepare 10%, 20% and 30% sucrose in PBS.

   2. Put the brains (dissected and post-fixed as detailed in Procedure A) in 10% sucrose, keep at 4 °C with gentle shaking. Wait to equilibrate (usually 8-12 h) until they sink to the bottom of the wells.

   3. Repeat Step E2 with sucrose 20% and then 30%. Increasing sucrose concentration in a gradual way is key for preserving optimal histology.

   4. Remove all sucrose from the brains by shaking them with a Pasteur pipette in OCT in a 6 cm Petri dish.

   5. Transfer the brains in OCT in Peel-A-Way^® boxes.

   6. Snap freeze them on dry ice.

   7. Store them at -80 °C until sectioning.

      
      

6. Cutting sections at the cryostat (10-20 μm)

   1. Equilibrate the brains at -20 °C for 30 min at the cryostat.

   2. Cut 20 μm thin sections for postnatal brains and 12-16 μm for embryonic brains.

   3. During cutting, collect series of sections on cryostat slides.

   4. Let the slides dry O/N at RT.

   5. Store them at -80 °C until use.

      
      

7. Immunostaining on cryostat sections

   1. Defreeze the sections for 1 h at RT.

   2. Put the slides on a vertical slide box for boiling.

   3. If your antibody needs unmasking, boil the slides for 15 s in an unmasking solution (0.1 M sodium citrate, pH 6).

   4. Boil them a second time for 1 s with fresh unmasking solution (0.1 M sodium citrate, pH 6).

   5. Cool the sections on ice for 10 min.

   6. Move the slides to a vertical slide box for washing

   7. Wash the sections 3 times in PBS for 10 min each at RT (on shaker).

   8. Create a humidified chamber by adding water or PBS in a plastic box where the slides can lay horizontally.

   9. Lay your slides horizontally and avoid the sections to dry by immediately adding the blocking solution (10% GS, 0.3% Triton in PBS).

   10. Block the sections in blocking solution for 1 h at RT by adding 1 ml for each slide.

   11. Prepare 200-300 μl of primary antibodies for each slide by diluting them to the appropriate concentration with the antibody solution (3% GS, 0.3% Triton in PBS).

   12. Add 200-300 μl of the diluted primary antibodies to the slides and cover them with cover slips to homogeneously distribute the antibody.

   13. Incubate the sections with primary antibodies (ON at 4 °C).

   14. The following day move the slides to the vertical slide box containing PBS.

   15. Wash the sections 3 times for 10 min each in PBS at RT while shaking.

   16. Prepare 200-300 μl of secondary antibodies per slide by diluting them to 1/300 in the antibody solution (3% GS, 0.3% Triton).

   17. Lay the slides horizontally again in the humidified chamber.

   18. Add 200-300 μl of the diluted secondary antibodies to the slides and cover them with cover slips to homogeneously distribute the antibody.

   19. Incubate the sections for 2 h at RT with diluted secondary antibodies.

   20. Move the slides to the vertical slide box containing PBS.

   21. Wash the sections 3 times for 10 min each in PBS at RT while shaking.

   22. Lay the slides horizontally after taking away extra PBS.

   23. Add 3 drops of mounting solution (80% glycerol, 2% N-propyl gallate, 1 μg/ml Hoechst) to each slide.

   24. Cover the slides with cover slips and seal the edges with nail polish.

   25. Leave the nail polish dry for 5 min at RT.

   26. Store the slides at -20 °C until imaging.

       
       

8. Imaging

   1. Take images of your area and layer of interest with the appropriate magnification

      1. For thin sections:

         Acquire plane images with a 10x/20x magnification using a fluorescent optical microscope.

      2. For thick sections: Acquire Z-stack images using a confocal microscope.

         Acquire Z-stack images using a confocal microscope.

   2. Use low (10x) and high magnification (40x) images of your layer of interest.

Data analysis

1. Data analysis for thin cryostat sections (coronal cutting plane):

   1. Process the 1 plane images acquired with 10x/20x magnification using Adobe Photoshop.

   2. For quantification of specific markers based on their layer position, use a binning system in Adobe Photoshop by overlaying a grid with 6-8 bins on the neocortical area of interest, from the marginal zone until the glial surface. Six bins are typically used for embryonic or postnatal day (P) 0 brains, while 8 bins can be used from P7.

   3. Count the cells expressing the protein of interest using Photoshop counting tool or an automated counting software like ImageJ.

   4. Normalize the number of marker-positive cells to the total number of cells (quantified by counting Hoechst⁺ nuclei) in each bin.

   5. Count at least 3 sections per animal and use at least 3 animals of each genotype for reliable statistical analysis.

   6. To avoid variability occurring between litters, the best option is to use littermate controls to compare the expression of specific genes/proteins of interest in different genetic backgrounds.

   7. Use two-tailed Student’s t-test on Microsoft Excel or on GraphPad Prism for statistical analysis of two independent data groups. For comparing multiple (> 2) groups, use analysis of variance (ANOVA) or other appropriate statistical tests.

      
      

2. Data analysis for thick vibratome sections:

   1. Process the Z-Stack images using the correspondent software of your confocal microscope (for example, Zen lite) and make a maximum intensity projection image.

   2. Count the cells expressing the protein of interest and normalize them to the total number of cells or to another marker depending on the purpose.

   3. Count at least 3 sections per animal and use at least 3 animals of each genotype for statistical analysis.

   4. Use littermate controls to compare the expression of specific genes/proteins of interest in different genetic backgrounds (example: wild-type versus knock-out) or after specific treatments, depending on your scientific question.

   5. Use two-tailed Student’s t-test on Microsoft Excel or on GraphPad Prism for statistical analysis of two independent data groups. For comparing multiple (> 2) groups, use analysis of variance (ANOVA) or other appropriate statistical tests.

Notes

1. To minimize subjective bias, sample identity (e.g., genotypes) can be randomized by associating an identification number to each sample before processing.

2. Fixed embryos/brains/sections with clearly damaged tissue must be excluded from any further analysis/processing.

3. Long O/N incubation with Blocking solution BEFORE addition of antibodies, together with long and repeated PBS washes, are crucial for background reduction and signal specificity, as they contribute to mask non-specific epitope sites and to remove excess antibodies, respectively.

4. Troubleshooting 1: Poor tissue fixation can result from perfusion with low-quality PFA. Avoid repeated thaw-freeze cycles by freezing PFA aliquots of appropriate volumes, and by using in one-two weeks after thawing.

5. Troubleshooting 2: Poor histology commonly results from inefficient tissue dehydration prior OCT embedding. Be sure to cryopreserve with long incubation in increasingly concentrated sucrose solutions (see Steps E1-E3).

6. Troubleshooting 3: In our experience, poor adhesion of cryostat tissue sections on glass slides can happen when using expired slides. Always check the expiring date of SuperFrost slides for optimal adhesion.

7. Troubleshooting 4: For correct background removal, be sure to use a normal serum from the same species as the one in which the secondary antibody was generated. The use of the incorrect serum can result in non-specific signal.

8. Tips 1: Many of the antibodies we used for studying cortical development detect nuclear transcription factors. The easiest way to check for the specificity of the staining, is to check for proper localization of the signal inside the cell nucleus.

9. Tips 2: When performing multiple co-staining, use secondary antibodies associated to fluorochromes that do not overlap on the light spectrum. This largely depends on your microscope settings; check technical specifications of your microscope lasers/filters. As an example, we experienced some signal overlap when using Alexa Fluor 594 (Rhodammine) together with Alexa Fluor 647 (Far red/Cy5) on our Leica Microscope; better results (no signal overlap) were obtained by replacing Alexa Fluor 594 with Alexa Fluor 555 (Texas Red).

Recipes

1. 4% PFA

   To prepare 1 L of PFA 4%:

   1. Dissolve 40 g of Paraformaldehyde powder (Sigma-Aldrich) in 1x PBS to reach 1 L

   2. Heat while stirring under the chemical hood on a temperature of approximately 60 °C

   3. When solution is transparent, let cool down then filter with Whatman paper to remove undissolved particles

   4. Freeze PFA aliquots in 50 ml tubes at -20 °C

2. 1x PBS

   1. Add the following chemicals to 1 L of distilled water

      8 g Sodium chloride

      200 mg Potassium chloride

      1.44 g Sodium phosphate dibasic heptahydrate

      240 mg Potassium dihydrogen phosphate

   2. Adjust pH to 7.4 with HCl

   3. Autoclave it

   4. Store it at RT

3. Unmasking Solution

   1. Prepare 1 M Trisodium Citrate Dihydrate solution in distilled water (store at 4 °C)

   2. Prepare 1 M citric acid solution in distilled water (store at 4 °C)

      
      

   To prepare 1 L of unmasking solution, add 85 ml of sodium citrate 1 M to 800 ml of distilled water.

   1. Measure pH while stirring

   2. Adjust to pH 6 using 1 M citric acid solution

   3. Bring the volume to 1 L with distilled water

   4. Filter your solution

   5. Store it at 4 °C

4. Agar 4%

   For each brain, you need to use approximately 5 ml of Agar 4% in a 12-well plate, to prepare 100 ml of Agar 4%:

   1. Dissolve 4 g of Select Agar ≥ 99.5% (GC) in 100 ml of PBS

   2. Boil in the microwave to obtain a clear Agar solution with no aggregates

   3. Incubate the agar solution in the water bath at 50 °C until mounting all the brains

5. 10, 20 and 30% Sucrose

   To prepare 50 ml of sucrose 10, 20 and 30%:

   1. Add respectively 5 g, 10 g and 15 g of sucrose and reach 50 ml with PBS 1x

   2. Vortex the solutions vigorously until fully dissolving the sucrose

   3. Store the solutions at 4 °C; for long term storage, freeze them at -20 °C

6. Blocking Solution for cryo-sections

   50 ml for immunostaining on thin cryo-sections:

   1. Add 5 ml Goat serum or NBCS (in case one of your primary antibody is made in goat)

   2. Add 150 μl of Triton

   3. Reach 50 ml by adding PBS

   4. Vortex until fully homogenizing the solution

   5. Store it at 4 °C (for few days)

7. Antibody Solution for thin cryo-sections

   50 ml for immunostaining on thin cryo-sections:

   1. Add 3 ml Goat serum (or NBCS, in case one of your primary antibody is made in goat)

   2. Add 150 μl of Triton

   3. Reach 50 ml by adding PBS

   4. Vortex until fully homogenizing the solution

   5. Store it at 4 °C (for few days)

8. Blocking Solution for vibratome sections

   50 ml for immunostaining on vibratome thick sections:

   1. Add 5 ml Goat serum or NBCS (in case one of your primary antibodies is made in goat or sheep)

   2. Add 150 μl of Triton 100

   3. Add 1.5 g of BSA

   4. Reach 50 ml by adding PBS

   5. Vortex until fully homogenizing the solution

   6. Store it at 4 °C (up to two weeks)

9. Antibody Solution for vibratome thick sections

   50 ml for immunostaining on vibratome thick sections:

   1. Add 3 ml Goat serum or NBCS (in case one of your primary antibody is made in goat)

   2. Add 150 μl of Triton 100

   3. Add 1.5 g of BSA

   4. Reach 50 ml by adding PBS

   5. Vortex until fully homogenizing the solution

   6. Store it at 4 °C (up to two weeks)

10. Mounting medium

    For 50 ml

    1. Add 40 ml glycerol

    2. Add 1 g N-propyl gallate

    3. Reach 50 ml with distilled water

    4. Boil in the microwave until homogenizing the solution

    5. Add 5 μl of Hoechst 33342, Trihydrochloride

    6. Store at 4 °C covered with aluminium foil to protect from light

Acknowledgments

This work was supported by the “Agence Nationale de la Recherche” under grant reference # ANR-13-BSV4-0011, by the “Fondation Recherche Médicale; Equipe FRM 2011” #DEQ20110421321 and by the “Fondation Jérôme Lejeune” under n° R13098AA to MS and by a postdoctoral fellowship from the city of Nice, France (“Aides Individuelles aux Jeunes Chercheurs”), to MB. KH was funded by a CNRS from Lebanon, AFM fellowship from France and an Alexander Von Humboldt fellowship from Germany. This protocol was elaborated on a previous work published in Harb et al. (2016).

Competing interests

The authors declare no competing interests.

Ethics

All animal procedures were conducted in strict accordance with relevant national and international guidelines and regulations (European Union rules; 2010/63/UE; and: Guide for the Care and Use of Laboratory Animals of the French Ministry of Research). All animal experiments were approved by the local ethical committee (CIEPAL registration numbers: NCE/2014-209 and NCE/2019-548). Standard approved housing conditions consisted in a 12 h light-dark cycle and housing with the recommended environmental enrichment (wooden cubes, cotton pad, igloo) with food and water ad libidum, three animals per cage max.

References

1. Harb, K., Magrinelli, E., Nicolas, C. S., Lukianets, N., Frangeul, L., Pietri, M., Sun, T., Sandoz, G., Grammont, F., Jabaudon, D., Studer, M. and Alfano, C. (2016). Area-specific development of distinct projection neuron subclasses is regulated by postnatal epigenetic modifications. Elife 5: e09531.