Materials and Reagents

1. 50 ml conical tube (Falcon, catalog number: 14 959 49A)
2. Lab tape (Thermo Fisher, catalog number: 15-901-20H)
3. EDTA-coated plasma collection tubes (Sarstedt, catalog number: 41.1395.105)
4. 1 ml 25G TB syringe (Becton Dickinson, catalog number: 309625)
5. 20 μM mesh nylon filter (Spectrum Labs, catalog number: 148134)
6. Whatman paper (Thermo Fisher, catalog number: 88600)
7. Petri dishes (Corning, catalog number: 07 202 011)
8. Eppendorf tubes (Corning, catalog number: 14 222 168)
9. LC/MS sample vials (Thermo Fisher, catalog number: C4000-11)
10. LC/MS vial caps (Thermo Fisher, catalog number: C5000-54B)
11. Glassware (bottles, graduated cylinders, conical flasks) reserved for LCMS (not washed by central glass washing services, as this can introduce surfactant and other contaminants into your system)
12. Pipettes (Gilson, catalog number: F167380)
13. Mouse surgical kit (Thermo Fisher, catalog number: 14516249)
14. Blood bank saline (Azer Scientific, catalog number: 16005-092)
15. 70% Ethanol (Thermo Fisher, catalog number: 04-355-305)
16. Acetonitrile LC/MS Optima 4 L (Fisher Scientific, catalog number: A955-4)
17. Methanol LC/MS Optima 4 L (Fisher Scientific, catalog number: A456-4)
18. Pierce formic acid (99%, LC/MS grade, Life Technologies, catalog number: 28905)
19. Water LC/MS Optima 4 L (Fisher Scientific, catalog number: W64)
20. Ammonium carbonate (Sigma-Aldrich, catalog number: 379999)
21. Ammonium hydroxide solution (28%, Sigma-Aldrich, catalog number: 338818)
22. Metabolomics amino acid standard mix (Cambridge Isotope Laboratories, Inc., catalog number: MSK-A2-1.2)
23. ¹³C isotopically labeled yeast metabolite extract (Cambridge Isotope Laboratories, Inc., catalog number: ISO1)
24. ¹³C₃ lactate (Sigma-Aldrich, catalog number: 485926)
25. ¹³C₃ glycerol (Cambridge Isotope Laboratory, catalog number: CLM-1510)
26. ¹³C₆ ¹⁵N₂ cystine (Cambridge Isotope Laboratory, catalog number: CNLM-4244)
27. ²H₉ choline (Cambridge Isotope Laboratory, catalog number: DLM-549)
28. ¹³C₄ 3-hydroxybutyrate (Cambridge Isotope Laboratory, catalog number: CLM-3853)
29. ¹³C₆ glucose (Cambridge Isotope Laboratory, catalog number: CLM-1396)
30. ¹³C₂ ¹⁵N taurine (Cambridge Isotope Laboratory, catalog number: CNLM-10253)
31. ²H₃ creatinine (Cambridge Isotope Laboratory, catalog number: DLM-3653)
32. ¹³C₅ hypoxanthine (Cambridge Isotope Laboratory, catalog number: CLM-8042)
33. ¹³C₃ serine (Cambridge Isotope Laboratory, catalog number: CLM-1574)
34. ¹³C₂ glycine (Cambridge Isotope Laboratory, catalog number: CLM-1017)
35. Chemical standard library pool 1
    

    Metabolite name	Manufacturer	Part#
    Alanine	Sigma	A7469
    Arginine	Sigma	A6969
    Asparagine	Sigma	A7094
    Aspartate	Sigma	A7219
    Carnitine	Sigma	C0283
    Citrulline	Sigma	C7629
    Cystine	Sigma	C7602
    Glutamate	Sigma	G8415
    Glutamine	Sigma	G3126
    Glycine	Sigma	G7126
    Histidine	Sigma	53319
    Hydroxyproline	Sigma	H54409
    Isoleucine	Sigma	I7403
    Leucine	Sigma	L8912
    Lysine	Sigma	L8662
    Methionine	Sigma	M5308
    Ornithine	Sigma	75469
    Phenylalanine	Sigma	P5482
    Proline	Sigma	P5607
    Serine	Sigma	S4311
    Taurine	Sigma	T0625
    Threonine	Sigma	T8441
    Tryptophan	Sigma	T8941
    Tyrosine	Sigma	T8566
    Valine	Sigma	V0513
    Lactate	Sigma	L7022
    Glucose	Sigma	G7528

36. Chemical standard library pool 2
    

    Metabolite name	Manufacturer	Part#
    2-hydroxybutyric acid	Sigma	220116
    2-aminobutyric acid	Sigma	162663-25G
    AMP	Sigma	A1752
    Argininosuccinate	Sigma	A5707-50MG
    Betaine	Sigma	61962
    Biotin	Sigma	B4639
    Carnosine	Sigma	C9625-5G
    Choline	Sigma	C7017
    CMP	Sigma	C1006
    Creatine	Sigma	C0780-50G
    Cytidine	Sigma	C4654
    dTMP	Sigma	T7004-100MG
    Fructose	Sigma	F0127
    Glucose-1-phosphate	Sigma	G6750
    Glutathione	Sigma	G4251
    GMP	Sigma	G8377
    IMP	Sigma	57510-5G
    O-phosphoethanolamine	Sigma	P0503-1G
    Pyridoxal	Sigma	P9130-500MG
    Thiamine	Sigma	T4625
    trans-Urocanate	Cayman	16228
    UMP	Sigma	U6375-1G
    Xanthine	Sigma	X7375-10G

37. Chemical standard library pool 3
    

    Metabolite name	Manufacturer	Part#
    3-hydroxybutyric acid	Sigma	H6501
    Acetylalanine	Sigma	A4625-1G
    Acetylaspartate	Sigma	00920-5G
    Acetylcarnitine	Sigma	A6706
    Acetylglutamine	Sigma	A9125-25G
    ADP	Sigma	A5285
    Allantoin	Sigma	05670-25G
    CDP	Abcam	ab146214-100 mg
    CDP-choline	Alfa	J64161-10 g
    Coenzyme A	Sigma	C4282
    Creatinine	Sigma	C4255-10MG
    gamma-aminobutyric acid	Sigma	A2129-10G
    GDP	Sigma	G7127
    Glutathione disulfide	Sigma	G4376
    Glycerate	Sigma	367494
    Hypoxanthine	Sigma	H9377
    myo-Inositol	Sigma	I5125
    NAD+	Sigma	N1511
    p-aminobenzoate	Sigma	A9878
    Phosphocholine	Sigma	P0378-5G
    Sorbitol	Sigma	W302902
    UDP	Sigma	94330-100MG
    UDP-glucose	Sigma	U4625-100MG

38. Chemical standard library pool 4
    

    Metabolite name	Manufacturer	Part#
    Phenylacetylglutamine	Cayman	16724-25mg
    Acetylglutamate	Sigma	855642
    Acetylglycine	Sigma	A16300-5G
    Acetylmethionine	Sigma	01310-5G
    Asymmetric dimethylarginine	Cayman	80230
    ATP	Sigma	A2383
    CTP	Sigma	C1506
    dATP	Sigma	D6500
    dCTP	Sigma	D4635
    Deoxycytidine	Sigma	D3897
    Folic acid	Sigma	F8758
    GTP	Sigma	G8877
    Hypotaurine	Sigma	H1384-100MG
    Methionine sulfoxide	Sigma	M1126-1G
    Methylthioadenosine	Sigma	D5011-25MG
    Phosphocreatine	Sigma	P7936-1G
    Pyridoxine	Sigma	P9755
    Ribose-5-phosphate	Sigma	83875
    SAH	Sigma	A9384-25MG
    Thymidine	Sigma	T9250
    Trimethyllysine	Sigma	T1660-25MG
    Uridine	Sigma	T1660-25MG
    Uridine	Sigma	U3003
    UTP	Sigma	U6625

39. Chemical standard library pool 5
    

    Metabolite name	Manufacturer	Part#
    3-phosphoglycerate	Sigma	P8877
    cis-aconitic acid	Sigma	A3412-1G
    Citrate	Sigma	754
    DHAP	Sigma	51269
    Fructose-1,6-bisphosphate	Sigma	F6803
    Fumarate	Sigma	240745
    Glucose-6-phosphate	Sigma	G7879
    Glycerol-3-phosphate	Cayman	20729-100 mg
    Guanidinoacetate	Sigma	G11608
    Kynurenine	Sigma	K8625
    Malate	Sigma	2288
    NADP+	Sigma	N0505
    Niacinamide	Sigma	72340
    2-oxoglutarate	Sigma	75890-25G
    Phosphoenolpyruvate	Sigma	P3637
    Pyruvate	Sigma	P5280
    Succinate	Sigma	S3674
    Uracil	Sigma	U0750

40. Chemical standard library pool 6

    Metabolite name	Manufacturer	Part#
    3-hydroxyisobutyric acid	Adipogen	CDX-H0085-M250
    2-hydroxyglutarate	Sigma	H8378
    Aminoadipate	Sigma	A0637
    beta-alanine	Sigma	14064
    Carbamoylaspartate	Alfa	A17166-10 g
    Cystathionine	Cayman	16061-50 mg
    Cysteic acid	Santa Cruz	sc-485621
    FAD	Sigma	F6625
    Glycerophosphocholine	Sigma	G5291-50MG
    Inosine	Sigma	I4125
    Orotate	Sigma	O2875
    Pantothenate	Sigma	P5155
    Phosphoserine	Fluka	79710
    Riboflavin	Sigma	R9504
    UDP-GlcNAc	Sigma	U4375
    Uric acid	Sigma	U2625-25G

41. Chemical standard library pool 7
    

    Metabolite name	Manufacturer	Part#
    Itaconic acid	Sigma	I29204
    Homocysteine	TCI	H0159
    2-oxobutyric acid	Sigma	K401
    2-hydroxybutyric acid	Sigma	220116
    Ascorbate	Sigma	A7506
    Sarcosine	Sigma	131776-100G
    Dimethylglycine	Sigma	D1156-5G
    N6-acetyllysine	Sigma	A4021-1G
    Pipecolate	Sigma	P45850-25G
    Indolelactate	Sigma	I5508-250MG-A
    Picolinate	Sigma	P42800-5G
    3-methyl-2-oxobutyrate	Sigma	198994-5G
    3-methyl-2-oxopentanoic acid	Sigma	198978-5G
    Formyl-methionine	Sigma	F3377-250MG
    2-aminobutyric acid	Sigma	A2536-1G
    Homocitrulline	Santa Cruz	sc-269298-100 mg
    gamma-glutamyl-alanine	Sigma	483834-500MG
    Mannose	Sigma	M6020-25G
    Cysteine-glycine (dipeptide)	Sigma	C0166-100MG

42. Mobile Phase A (see Recipes)
43. Mobile Phase B and Needle Wash (see Recipes)
44. Rear Seal Wash (see Recipes)
45. 80% methanol containing ¹³C-¹⁵N labeled amino acid mix (see Recipes)
46. Extraction Buffer with isotopically labeled internal standards (EB) (see Recipes)
47. Chemical standard library preparation (see Recipes)
    

Equipment

1. Sorvall Legend X1R Refrigerated Centrifuge (Thermo Fisher, catalog number: 75004260)
2. Sorvall Legend Micro 21 Refrigerated Centrifuge (Thermo Fisher, catalog number: 75002447)
3. Mixer Mill (Retsch, catalog number: MM301)
4. 50 ml Mixing Jar (Retsch, catalog number: 01.462.0216)
5. 5 mM Grinding Balls (Retsch, catalog number: 05.368.0034)
6. LP Vortex Mixer (Thermo Fisher, catalog number: 11676331)
7. Analytical balance (Mettler Toledo, catalog number: AL54)
8. Dionex Ultimate 3000 UHPLC equipped with RS Binary Pump, RS column oven and RS autosampler (Thermo Fisher Scientific, San Jose, CA)
9. QExactive hybrid quadrupole-Orbitrap benchtop mass spectrometer equipped with an Ion Max ion source and HESI-II probe (Thermo Fisher Scientific, San Jose, CA)
10. SeQuant^® ZIC^®-pHILIC 5 μm 150 x 2.1 mm polymeric analytical PEEK HPLC column (Millipore Sigma, catalog number: 1504600001)
11. SeQuant^® ZIC^®-pHILIC 5 μm 20 x 2.1 mm PEEK Guard Kit with coupler (3 pc) (Millipore Sigma, catalog number: 15043800001)
    

Software

1. Thermo Scientific Xcalibur 4.1 SP1 (Thermo Fisher Scientific)
2. Microsoft Excel
   

Procedure

1. Study design
   1. How many biological replicates are recommended?
      
      1. The number of biological replicates needed for studies will depend on the variability between samples. For animal studies, where a large number of variables can be controlled (i.e., tumor genetics, tumor size, animal genetics, animal diet, time of interstitial fluid isolation), variability will likely be smaller than for human samples. Additionally, the number of replicates required will depend on the intended purpose of the experiment to be performed. For example, if the intended purpose is to determine if there is a nutritional difference in the interstitial fluid between two tumor types, it is important to determine an effect size between the groups in addition to variability between samples in order to estimate sample sizes needed. We recommend generating pilot data or utilizing previously published data on TIF composition differences (Sullivan et al., 2019) to estimate effect sizes and utilizing power analysis software in Metaboanalyst (Chong et al., 2018) or other statistical analysis software to estimate the number of biological replicates needed.
      2. Additionally, when determining the number of biological replicates needed, it is important to note that not every tumor will necessarily yield interstitial fluid. In our experience, roughly 75% of murine pancreatic adenocarcinomas yielded tumor interstitial fluid (TIF) with volumes ranging from 5 to 180 μl of fluid (Sullivan et al., 2019). Therefore, additional samples may be required to achieve the required number of replicates determined from power analysis.
   2. We recommend harvesting TIF at the same time from all animals involved in a study. Circadian rhythm and food intake can alter plasma metabolite levels and therefore TIF metabolite levels, introducing additional variability (Dallmann et al., 2012; Abbondante et al., 2016). If TIF must be harvested from animals on different days, we recommend harvesting TIF at the same time during the day.
   3. We recommend two people work together to isolate TIF and cardiac blood to increase the speed of TIF harvest to prevent alterations in TIF composition due to prolonged periods of ischemia occurring between euthanasia and TIF harvest. In our own experiments, dissection was completed in ~2 min. and we found limited evidence of ischemia altering tumor metabolite levels (Sullivan et al., 2019).
   4. We have successfully isolated TIF using the protocol described in Procedure B from multiple genetically engineered and implantation mouse models of breast, lung, prostate, pancreas and melanoma cancers and others have isolated TIF from murine models of melanoma and breast cancer (Ho et al., 2015; Eil et al., 2016; Spinelli et al., 2017; Zhang et al., 2017) using similar protocols. Additionally, similar protocols have been used to isolate TIF from renal (Siska et al., 2017) and ovarian carcinomas (Haslene-Hox et al., 2011). Thus, we anticipate the TIF isolation protocol can be used successfully for a variety of tumor types, of mouse and human origin.
   5. The analysis described in Procedure C uses 7 separate chemical standard pools as described in (Sullivan et al., 2019) that enable the quantification of 149 metabolites commonly measured in biofluids (Lawton et al., 2008; Evans et al., 2009; Mazzone et al., 2016; Cantor et al., 2017). However, depending on experimental goals, the full analysis utilizing all 7 standard pools may not be required. Subsets of the chemical standard pools can be used that cover analytes of interest if the full analysis is not needed. Note though that individual metabolites in the standard pools provided in this protocol have been carefully selected so as to avoid metabolites with the same m/z (isomeric and isobaric species) being in the same pool. In addition, metabolites that could be generated by in-source fragmentation from larger metabolites have been separated.
   6. The description of the liquid chromatography-mass spectrometry analysis in this protocol (Procedure D) is a rough guideline for experienced operators of such instruments to perform the analysis described. Successful mass spectrometry analysis of the samples will require a trained UHPLC and Thermo Scientific hybrid quadrupole-Oribtrap mass spectrometer operator.
      
      
2. Isolation of TIF and plasma from tumor bearing animals
   1. Prepare a TIF isolation tube (Figure 1 A).
      
      1. Take a nylon filter and place it over the top of a 50 ml conical tube.
      2. Tape the filter down using lab tape. Make sure the filter is affixed somewhat loosely to the top of the conical tube, such that the tumor can push the filter down slightly into the tube.
         
         
         Figure 1. Collecting TIF using nylon mesh filters attached to conical tubes. A. The filter is loosely affixed to the top of the conical tube using laboratory tape, so that the filter will sag slightly into the conical tube when a sample is placed on top of the filter. B. A sample on top of the filter and conical tube. C. After adding the sample to the filter, the lid of the conical tube is placed on top, but not screwed onto the conical. Instead, it is taped using laboratory tape in place. D. ~30 μl of tumor interstitial fluid (colored blue to here for contrast) collected in the conical tube after centrifugation.
         
         
   2. Prepare materials in advance to allow for rapid mouse dissection.
      
      1. Put pre-chilled (4 °C) saline (~25 ml) into a Petri dish for washing the tumor.
      2. Make a ~4 cm square piece of Whatman paper for drying the tumors after the saline rinse.
      3. Have a 25G TB syringe ready for cardiac blood collection.
      4. Label and pre-chill one EDTA-coated plasma collection tubes on ice for 10 min prior to mouse dissection.
   3. Euthanize the mouse by cervical dislocation.
   4. Spray around the incision site with 70% ethanol to prevent contamination of samples with hair.
   5. Quickly and cleanly dissect the tumor away from the animal. The exact procedure for the dissection will depend on the anatomical location of the tumor. One person should continue with the following steps while the other person can start on plasma isolation (Step B6).
      
      1. Place the tumor into the saline containing Petri dish to rinse the tumor.
      2. Blot the tumor dry on Whatman paper. Take care at this step to ensure all saline is blotted from the tumor, so that saline does not contaminate the TIF.
         If concerned about saline contamination during TIF isolation, we suggest the following additional step: add a non-natural metabolite such as norvaline to the saline. Continue with the remainder of the protocol as normal. Subsequently, when analyzing TIF samples, determine if the non-natural metabolite is present in the TIF sample. If the non-natural metabolite is detected this indicates saline contamination, whereas if the metabolite is not detected saline contamination is unlikely.
         
      3. Optional: Weigh the tumor if this information is needed. Tumor volume can also be determined by caliper measurements if needed.
      4. Place the tumor on top of the nylon mesh filter that is affixed to the conical tube (Figure 1B). Place the 50 ml conical lid over the tumor and tape the lid in place (Figure 1C).
         
      5. Centrifuge the tumor at 4 °C for 10 min at 106 x g using a refrigerated clinical centrifuge (e.g., Sorvall Legend X1R).
         
      6. Remove the 50 ml conical tube. If the isolation worked, there will be 10-50 μl of fluid in the bottom of the conical tube (Figure 1D). Keep the tube on ice.
         Note: Human tumors have been found to yield 5-150 μl of fluid per gram of tumor (Haslene-Hox et al., 2011). Similarly, we isolated 10-50 μl of fluid from murine pancreatic tumors weighing ~0.3-2.5 g (Sullivan et al., 2019). There is not an exact correlation between tumor size and TIF volume, as many factors likely influence interstitial volume. However, larger tumors are more likely to yield TIF in larger volumes. Tumors with large fluid filled cysts can give hundreds of μl of fluid per gram of tumor. Disregard these from analysis as it is unclear if the cystic fluid is representative of interstitial fluid.
      7. Remove the isolate fluid to a fresh Eppendorf tube. The fluid can be extracted directly for LC/MS analysis or frozen and stored at -80 °C for future analysis.
         We have analyzed TIF samples both before and after 2 months of storage at -80 °C (avoiding freeze-thaw cycles) and detected similar metabolite concentrations after storage (Sullivan et al., 2019). Thus, TIF samples can be stored for at least 2 months without freeze-thaw cycles prior to analysis.
      8. The tumor from which TIF was isolated can be used for additional analysis using other appropriate protocols.
         Note: We have successfully used tumors from which TIF was isolated for immunohistochemical, immunoblotting and flow cytometric analyses.
   6. Use the 25G TB syringe to isolate blood from the mouse heart by cardiac puncture. Cardiac puncture can be a difficult technique to perform. Detailed protocols with video documentation of cardiac puncture blood isolation have been previously published (Schroeder, 2019). If unfamiliar with this technique, we recommend utilizing these resources for more detailed information on isolating blood in this manner.
      
      1. Dissect open the thoracic cavity.
      2. Insert the syringe into the ventricle.
      3. Slowly withdraw blood to prevent collapse of the heart.
      4. Remove the needle from the syringe to prevent cell lysis when expelling the cells from the syringe.
         
      5. Expel the blood into the EDTA-coated plasma collection tube.
         
      6. Keep plasma on ice.
         
      7. Spin the EDTA-coated plasma collection tubes at 845 x g in benchtop centrifuge (e.g., Sorvall Legend Micro 21) for 15 min at 4 °C.
         
      8. Remove the plasma from the pelleted blood cells and put into fresh Eppendorf tube.
         
      9. Extract this plasma directly for LC/MS analysis or freeze and store at -80 °C for future analysis.
         Note: Previous studies have found that plasma samples can be stored at -80 °C (without freeze-thaw cycles) for up to 30 months without significant alterations in the levels of many metabolites (Stevens et al., 2019). Thus, plasma samples can be stored for many months prior to analysis.
         
         
3. Extraction of metabolites from TIF and plasma
   1. Prepare libraries of pooled chemical standards that include the metabolites to be quantified. See Recipes section and Tables 5-11 for details on how libraries were compounded in (Sullivan et al., 2019).
   2. Prepare metabolite extraction buffer (EB) (Recipe 5) with appropriate isotopically labeled internal standards. See Recipes section for details on making EB with isotopic standards as described in (Sullivan et al., 2019).
      Note: Make enough EB for the number of samples and standards you have plus an additional 10%, so as not to run out of EB before extracting metabolites from every sample. 45 μl of EB is needed for each sample and standard pool dilution. Isotopically labeled metabolite standards in the EB are not indefinitely stable. Prepare EB fresh prior to each experiment.
   3. Prepare dilutions of chemical standard libraries in HPLC grade water. The highest concentration should be 5 mM.
   4. Next, make dilution series of each standard pool in HPLC grade water as listed below in Step C5. Keep these on ice prior to extraction. Note that multiple dilutions of the chemical standard libraries are required for construction of standard curves relating known metabolite concentration to LC/MS response, which is necessary for downstream analysis of metabolite concentrations. Below we recommend a scheme to generate 8-point standard curves covering physiological concentrations of metabolites, but variations are possible.
   5. The 5 mM pool will not be always in solution for each pool, therefore vortex vigorously and immediately pipette from this mixture in order to prevent error from settling particles:
      
      1. Take 20 μl of 5 mM stock and dilute into 80 μl HPLC grade water to yield a 1 mM solution.
      2. Take 30 μl of 1 mM stock and dilute into 70 μl HPLC grade water to yield a 300 μM solution.
      3. Take 33.33 μl of 300 μM stock and dilute into 66.67 μl HPLC grade water to yield a 100 μM solution.
      4. Take 30 μl of 100 µM stock and dilute into 70 μl HPLC grade water to yield a 30 μM solution.
         
      5. Take 33.33 μl of 30 μM stock and dilute into 66.67 μl HPLC grade water to yield a 10 μM solution.
         
      6. Take 30 μl of 10 μM stock and dilute into 70 μl HPLC grade water to yield a 3 µM solution.
         
      7. Take 33.33 μl of 3 μM stock and dilute into 66.67 μl HPLC grade water to yield a 1 μM solution.
   6. Thaw the TIF and plasma samples on ice.
   7. Add 5 μl of each TIF sample, plasma sample and chemical standard library dilution (Recipe 6) to a fresh Eppendorf tube. Keep on ice.
   8. Add 45 μl of EB to each sample/standard. Keep on ice.
   9. Vortex all the samples for 10 min at maximum speed at 4 °C.
   10. Spin down all samples for 10 min at 21,000 x g at 4 °C.
   11. Take 20 μl of the mixtures from the Eppendorf tube and add to an LC/MS sample vial. Cap the vial.
       Note: A minimum of 15 μl is needed in the LC/MS vial to ensure correct and accurate injection by the autosampler. The vials described in Materials and Reagents contain fused inserts. Vials without inserts will require larger volumes. 
   12. Freeze the remaining sample in the Eppendorf tubes and store at -80 °C. This sample can be run later if the initial LC/MS is not successful.
       
       
4. Liquid chromatography-mass spectrometry analysis of extracted metabolites
   1. Start off with a clean system (use appropriate LC cleaning methods in place in your lab).
   2. Calculate the amount of Mobile Phase A (Recipe 1) required and prepare fresh on the day of analysis. Store this for no more than one week.
      Note: Depending on your system, you will use ~2 ml per injection and require an additional 50-100 ml in the bottle. Do not forget to make enough Mobile Phase A for additional injection types such as solvent blanks and system suitability tests that must be run in addition to the samples.
   3. Calculate the amount of Mobile Phase B (Recipe 2) required and prepare more if needed. Depending on your system, you will need ~2 ml per injection plus an additional 50-100 ml in the bottle.
   4. Check the level of rear seal wash (Recipe 3) and top up if needed.
   5. If using an UHPLC system that has a separate needle wash, fill this with acetonitrile.
   6. Connect a SeQuant^® ZIC^®-pHILIC 5 μm 150 x 2.1 mm analytical column to the Guard column using the connector supplied in the Guard kit.
   7. Connect the column and guard to your UHPLC system using standard techniques.
   8. Set the column oven temperature to 25 °C. 
   9. Set the autosampler temperature to 4 °C.
   10. Set initial conditions: set the flow rate to 0.150 ml/min with 80% B. Record initial pressure value.
       Note: ZIC-pHILIC columns cannot tolerate such high back pressures and injection volumes as typical reverse phase columns. Keep an eye on the back pressure and do not let it exceed the maximum pressure recommended by the manufacturer. It is good practice to set a maximum pressure in your method that is below that set by the manufacturer to avoid damage to the column.
   11. Equilibrate the column with starting conditions (80% B) for 30 min prior to running anything on the system. 
   12. Check the mass calibration on the mass spectrometer. If the mass has not been calibrated within the last week, or if it fails the mass check, recalibrate using the standard calibration mixes recommended by the manufacturer. In addition, perform a custom low-mass calibration by spiking glycine and aspartate into the calibration mix, or as recommended by the manufacturer. 
   13. Ensure your entire LCMS system performance is acceptable by running system suitability tests, such as injecting a mixture of amino acids onto your column and into the MS. Check for signal intensity as well as peak shape and separation.
   14. Use the conditions shown in Table 1 below for the UHPLC gradient:
       
       Table 1. LC parameters
       

       Time (min)	Flow rate (ml/min)	%B
       0.00	0.150	80
       20.0	0.150	20
       20.5	0.150	80
       28.0	0.150	80

       
       
   15. Operate the mass spectrometer in full-scan, polarity-switching mode, with a scan range of 70-1000 m/z. Include an additional narrow-range scan from 220 to 700 m/z in negative mode to improve detection of nucleotides. Use the parameters shown below in Tables 2 and 3 for the MS:
       
       Table 2. MS source parameters
       

       Parameter	Setting
       Spray voltage	3.0 kV (pos); 3.1 kV (neg)
       Heated capillary	275 °C
       HESI probe	350 °C
       Sheath gas	40 units
       Aux gas	15 units
       Sweep gas	1 unit

       
       Table 3. MS scan parameters
       

       Parameter	Setting
       Resolution	70,000
       AGC target	1E6
       Max IT	20 ms

       
       
   16. Note that in this particular study, we had previously collected MS/MS data for each metabolite being quantified, and used this to confirm retention times using a library of chemical standards. If adding new metabolites to your standard pools, collect MS/MS data on the standard itself, as well as on a pooled biological sample to help confirm peak identification. 
   17. Write your sequence (sample run order) using Thermo Scientific Xcalibur Sequence Setup View.
       Note: Given the extremely low volume of samples used in this method, the sequence differs from typical sequences which will include column conditioning injections, as well as quality control pooled samples. As multiple standard curves are run and each sample includes ¹³C-labeled internal standards, we chose to forgo using precious sample to create QC pools and instead determine linearity and consistency of metabolite detection using the standard curves and the ¹³C internal standards.
       
       1. Start off by injecting several water blanks to ensure system is clean from carry over and contaminants.
       2. Include solvent blanks, using the 75/25/0.1 acetonitrile/methanol/formic acid mix that was used to make the extraction mix.
       3. Follow with a system suitability test (SST) injection. We use 80% methanol containing ¹³C-¹⁵N labeled amino acid mix (Recipe 4).
       4. Add the samples to your sequence and follow with the standard curves, starting with the lowest concentration and working up to the highest concentration for each curve. Separate each curve with solvent blank and check for carry-over.
          
       5. Insert additional SST injections every 8-10 samples. These will be used as QCs to ensure no loss of signal over time.
          
       6. Set the injection volume to 2 μl for each injection type.
          
       7. Set the instrument method to the appropriate method.
          
       8. Save the sequence file.
          
       9. Randomize sample running order to decrease the chance of signal loss over time. Export the sequence as a .csv file. Open in Microsoft Excel, cut and paste the samples into a new tab, leaving behind the blanks, STTs and standard curves. Add an additional column and use the = rand () function to create random numbers for each of the samples. Now sort the samples from smallest to largest using the random number values. Cut and paste back into the previous sequence containing the blanks, SSTs and the standard curves. Save the .csv file with “random” in the file name. Import the new randomized sequence back into Xcalibur Sequence View and save using “random” in the file name.
          
       10. Place your sample vials in the autosampler in the vial positions according to the sequence. Use the non-randomized sequence to check vial positions for your samples.
       11. Ensure the solvent blank vials and SST vials contain enough volume for multiple injections.
           
   18. Run the sequence.
       Note: For examples of expected outputs from the LC/MS analysis of TIF and plasma samples, LC/MS data from (Sullivan et al., 2019) is available at https://www.metabolomicsworkbench.org/data/DRCCMetadata.php?Mode=Project&ProjectID=PR000750.
       

Data analysis

1. Identify metabolite peaks. This protocol will describe peak identification in Thermo Scientific Xcalibur, but could be adapted with any other peak identification method.
   1. Generate a processing method file that will be used to identify peaks for each metabolite of interest:
      
      1. Create a new processing method.
      2. Load a .raw file containing LC/MS data derived from an external standard sample that contains the metabolite of interest as well as a ¹³C internal standard for that metabolite.
         Note: Typically using an external standard sample that is in the middle of the standard curve works best; sometimes high concentrations points on the standard curve have poor quality peaks.
         
      3. Calculate the exact mass of the metabolite of interest.
         Notes:
         
         1. Exact mass is determined by summing the masses of the most abundant isotopes of each element in a compound. For instance, the exact mass of CO₂ would be the summed masses of a carbon-12 atom (12.000) + two oxygen-16 atoms (15.995 + 15.995) = 43.990. This exact mass of a compound will differ from its molecular weight; the molecular weight of an element is derived by averaging the masses of each of the isotopes of that element, weighted by the abundance of each isotope in nature.
         2. If using Thermo Scientific Xcalibur, calculate the exact mass using the Isotope Simulation tab in the QualBrowser module. Enter the chemical formula, ensure the “adduct” check box in unchecked and select “New”. Ensure that the software global settings are set to a mass tolerance of 5 ppm and mass precision is set to 5 decimal places. Ideally, the peak integration software that you are using should calculate this for you.
      4. Calculate the mass to charge ratio (m/z) of the metabolite of interest in positive and negative ionization mode.
         Notes: 
         
         1. For analysis of small polar metabolites, the most common ions will be those that have gained or lost a single proton and most molecules will have a charge state of 1.
         2. If using Thermo Scientific Xcalibur, calculate the m/z using the Isotope Simulator in the QualBrowser module by entering the formula, checking the “adduct” box and selecting a charge of either +1 or -1, depending on whether you are calculating the m/z in positive or negative mode, respectively.
         3. There are a variety of online tools available that will provide exact mass information, as well as calculate m/z for a variety of different adducts. The most comprehensive is the Metlin data base (Guijas et al., 2018): https://metlin.scripps.edu/landing_page.php?pgcontent=mainPage.
      5. In the processing method, select either positive ionization mode or negative ionization mode depending on whether you will be searching for a positively charged ion or a negatively charged ion.
         Note: Some metabolites are more easily detected in positive or negative mode. A list of recommendations for which mode to use for a variety of metabolites is located in Supplementary File 1 of (Sullivan et al., 2019). If no recommendations are available, empirically determine which method gives better detection by trying both.
      6. Identify and validate the retention time of each metabolite:
         
         1. Search for the exact mass of the ion of interest.
         2. Note the retention time of any peaks that match the exact mass of the ion of interest within 5 ppm.
         3. Open a .raw file of a different external standard sample with the metabolite of interest at a lower concentration.
            
            1)

            Note which peaks that match the exact mass of the ion of interest decrease in area.
            2)

            Repeat with each of the external standard samples that contain the metabolite of interest, checking which peak areas track with the expected amount of the metabolite.
            3)

            Refer to MS/MS data to confirm peak identification.
         4. Open a .raw file that does not contain the metabolite of interest. Ensure that any candidate peaks are not present in this .raw file.
            
         5. Search for the exact mass of the ¹³C labeled version of the ion of interest.
            Note: This peak should be approximately the same area in all samples.
         6. Check that the retention time of the ¹³C labeled standard peak exactly matches that of the candidate peak.
         7. Repeat for all metabolites of interest.
            
      7. Assign ¹³C labeled standards as internal standards for their corresponding ¹²C metabolites.
         For metabolites with no ¹³C internal standard, assign a ¹³C metabolite with a similar retention time as the internal standard.
   2. Use the processing method to pick and validate peaks for all metabolites in all LC/MS data files (both experimental samples and external standards):
      
      1. Once all peaks have been automatically picked, manually inspect every peak for each metabolite and for each sample to ensure that all peaks have been correctly identified. Some common examples of errors that occur with automatic peak picking algorithms:
         
         1. Incorrect peak was picked: this can occur for isobaric compounds with similar retention times, such as leucine and isoleucine.
         2. Peak was not fully picked from baseline to baseline.
         3. Peak was picked but overlaps with a second peak: this occasionally happens where biological samples have an overlapping peak that was not present in the external standards. If this is the case, this metabolite should not be quantitated using this LC/MS method and an alternative method of chromatographic separation should be identified.
      2. Export the ratio of peak areas for the sample versus the ¹³C internal standard to Microsoft Excel or your data processing software of choice.
         
         
2. Determine the relationship between relative peak area and concentration of metabolite in external standards.
   1. Calculate the exact concentration of each metabolite in each point on the external standard curve based on the amount that was weighed out.
   2. Generate a graph of metabolite concentration in each external standard sample versus the relative peak area of the metabolite.
   3. Check if the relative peak area of the metabolite increases linearly with concentration:
      
      1. Fit a linear regression to the graph.
         
      2. The R² value for the linear regression should be ≥ 0.995.
         Metabolites often respond non-linearly at high concentrations. If the standard curve has points that are much higher than the concentrations present in experimental samples, the highest points on the standard curve can be removed. Just ensure that the relative peak areas for all samples fall within the linear range of the standard curve.
         
      3. Non-linear metabolites should be excluded from quantitative analysis, as this lack of linearity will prevent accurate quantitation by isotope dilution.
      
      
3. Determine the concentrations of the internal standards that were added to all samples.
   Solve for the concentration of ¹³C internal standard present in each external standard sample using the following relationship:
   
   
   
   Note: This relationship can be used to calculate the concentration of the ¹³C internal standard in each of the external standard samples; the same concentration should be present in each. To derive the most accurate value for the concentration of the ¹³C internal standard, average the concentrations derived from the external standard points most similar in concentration to the experimental samples.
   
   
4. Calculate the concentration of each metabolite in the experimental samples by isotope dilution. Solve for the concentration of the ¹²C metabolite using the same relationship defined in step C.
   
   
5. Calculate the semi-quantitative concentration of all other analytes using the external standard curves. These values are considered semi-quantitative as they are subject to matrix effects arising from the biological samples being compared to external standards dissolved in water. These matrix effects can be substantial (Sullivan et al., 2019).
   
   1. Calculate the slope and intercept of the linear regression calculated in step B3a.
   2. Use this slope and intercept to calculate the semi-quantitative value approximating the concentration of the metabolite.
   3. Manually evaluate the concentrations derived from this calculation:
      
      1. Check that the value of each metabolite is zero in the external standard samples that do not contain that metabolite.
      2. Any data that shows a negative concentration should be removed.
      
      
6. Perform statistical analysis of the data using Metaboanalyst (https://www.metaboanalyst.ca/MetaboAnalyst/faces/home.xhtml) (Chong et al., 2018) or another program for statistical analysis.
   1. Auto-scale the data (mean-center and divide by the standard deviation of each concentration).
   2. To broadly compare if there are differences in the metabolites present in two sample types, perform principal component analysis or hierarchical clustering.
   3. To identify specific metabolites that differ in concentration between sample types, generate a volcano plot in which a raw P-value of 0.01 and a fold change of 1.5 are used to identify significantly altered metabolites.
      

Recipes

1. Mobile Phase A
   20 mM ammonium carbonate
   0.1% ammonium hydroxide (pH 9.4-9.6)
   Optima LC/MS water
2. Mobile Phase B and Needle Wash
   Optima LC/MS acetonitrile
3. Rear Seal Wash
   10% Optima LC/MS methanol
   Optima LC/MS water
4. 80% methanol (containing ¹³C-¹⁵N amino acid standard mix) (200 ml)
   160 ml Optima LC/MS methanol
   40 ml Optima LC/MS water
   40 μl Metabolomics Amino Acid Standard Mix
5. Extraction Buffer with isotopically labeled internal standards (EB) (Table 4)
   Notes:
   
   1. This is the recipe containing isotopically labeled internal standards for analysis of metabolites as in (Sullivan et al., 2019). If analysis of other metabolites using stable isotope internal standards is desired, purchase or synthesize the desired isotopically labeled metabolite and add it to the Extraction Buffer. Quantification with isotopically labeled standards performs best when the abundance of the isotopically labeled metabolite is similar to the unlabeled metabolite to be quantified. Therefore, when adding isotopically labeled internal standards, add the isotope such that it will be at roughly a similar abundance as the unlabeled metabolite when the sample is diluted in the Extraction Buffer.
   2. This recipe is for 180 samples at 45 μl per sample for a total of 8,100 μl in volume. Adjust the volumes accordingly as needed for the number of samples you intend to analyze. After adding all components, vortex briefly to ensure EB is well mixed, and store on ice while in use. Make fresh prior to each experiment. Remember to include extra 75/25/0.1 acetonitrile/methanol/formic acid for use as solvent blanks in your calculations.
      
      Table 4. Extraction Buffer (EB) composition
      

      Component	Volume added	Final concentration
      HPLC grade acetonitrile	5771.25 μl	71.25%
      HPLC grade methanol	1923.75 μl	23.75%
      HPLC grade formic acid	15.39 μl	1.9%
      ~15 mg of isotopically labeled yeast extract (ISO1) dissolved in 1.5 ml of HPLC grade water. Note: After adding water to the yeast extract, dissolve the yeast extract by vortexing and/or rocking the yeast extract and water at 4 °C for approximately 30 min. Solution can be stored at -80 °C although some metabolites will degrade over time (see manufacturer’s instructions)	405 μl	5%
      2 mM solution of 2H9 choline prepared in HPLC grade water (stored at -20 °C)	4.03 μl	1 μM
      50 mM solution of 13C4 3-hydroxybutyrate prepared in HPLC grade water (stored at -20 °C)	0.81 μl	5 μM
      200 μM solution of 13C6 15N2 cystine prepared in HPLC grade water (stored at -20 °C)	81 μl	2 μM
      100 mM solution of 13C3 lactate prepared in HPLC grade water (stored at -20 °C)	16.2 μl	200 μM
      57.3 mM solution of 13C6 glucose prepared in HPLC grade water (stored at -20 °C)	7.05 μl	50 μM
      100 mM solution of 13C3 serine prepared in HPLC grade water (stored at -20 °C)	1.62 μl	20 μM
      750 mM solution of 13C2 glycine prepared in HPLC grade water (stored at -20 °C)	1.62 μl	150 μM
      2 mM solution of 13C5 hypoxanthine prepared in HPLC grade water (stored at -20 °C)	2.02 μl	0.5 μM
      200 mM solution of 13C2 15N taurine prepared in HPLC grade water (stored at -20 °C)	2.02 μl	50 μM
      60 mM solution of 13C3 glycerol prepared in HPLC grade water (stored at -20 °C)	2.02 μl	15 μM
      4 mM solution of 2H3 creatinine prepared in HPLC grade water (stored at -20 °C)	2.02 μl	1 μM

      
      
6. Chemical standard library preparation
   Below are recipes for the preparation of chemical standard libraries described in (Sullivan et al., 2019). To prepare these chemical libraries, purchase the chemicals from the listed supplier and weigh them out as indicated, placing each metabolite into a 50 ml mixing mill jar. Mix the combined metabolites using a Mixer Mill MM301 with five 5 mm diameter stainless steel grinding balls. Perform 6 cycles of 1 min mixing at 25 Hz followed by 3 min resting. Store the now mixed chemical standard library powder stocks at -20 °C prior to use. For use, resuspend each mixed chemical library in HPLC grade water at 5 mM concentration as indicated for each library below.
   Custom chemical standard libraries can be produced by acquiring desired pure chemical standards and mixing the pure chemical standards in equimolar amounts. When generating libraries, it is important to ensure that each library will not contain metabolites that have the same exact mass, as it is not then possible to determine the correct retention time for both metabolites when compounded into the same library. Consider putting these metabolites into separate pooled libraries (Tables 5-11).
   
   Table 5. Chemical standard library pool 1
   

   Metabolite name	Molecular weight of metabolite	Molecular weight of chemical standard	Amount to weigh (mg)
   Alanine	89.09	89.09	429.99
   Arginine	174.2	210.66	1016.75
   Asparagine	132.12	150.13	724.60
   Aspartate	133.11	133.11	642.45
   Carnitine	161.199	197.66	954.00
   Citrulline	175.2	175.2	845.60
   Cystine	240.3	240.3	1159.80
   Glutamate	147.13	147.13	710.12
   Glutamine	146.14	146.14	705.34
   Glycine	75.066	75.066	362.30
   Histidine	155.1546	155.1546	748.85
   Hydroxyproline	131.13	131.13	632.89
   Isoleucine	131.1729	131.1729	633.10
   Leucine	131.17	131.1729	633.10
   Lysine	146.19	182.65	881.56
   Methionine	149.21	149.21	720.16
   Ornithine	132.16	168.62	813.84
   Phenylalanine	165.19	165.19	797.28
   Proline	115.13	115.13	555.67
   Serine	105.09	105.09	507.21
   Taurine	125.15	125.15	604.03
   Threonine	119.119	119.119	574.92
   Tryptophan	204.225	204.225	985.69
   Tyrosine	181.19	181.19	874.51
   Valine	117.151	117.151	565.42
   Lactate	90.09	112.06	540.85
   Glucose	180.1559	180.1559	869.52

   Note: Dissolve this pool at 20.19 mg/ml for 5 mM solution.
   
   Table 6. Chemical standard library pool 2
   

   Metabolite name	Molecular weight of metabolite	Molecular weight of chemical standard	Amount to weigh (mg)
   2-hydroxybutyric acid	104.1	126.09	12.61
   2-aminobutyric acid	103.12	103.12	10.31
   AMP	347.2212	347.22	34.72
   Argininosuccinate	290.273	334.24	33.42
   Betaine	117.1463	117.15	11.71
   Biotin	244.31	244.31	24.43
   Carnosine	226.2324	226.23	22.62
   Choline	104.1708	139.62	13.96
   CMP	323.1965	367.16	36.72
   Creatine	131.133	131.13	13.11
   Cytidine	243.2166	243.22	24.32
   dTMP	320.1926	366.17	36.62
   Fructose	180.16	180.16	18.02
   Glucose-1-phosphate	260.135	336.32	33.63
   Glutathione	307.3235	307.32	30.73
   GMP	363.22	407.18	40.72
   IMP	348.206	392.17	39.22
   O-phosphoethanolamine	141.063	141.06	14.11
   Pyridoxal	167.16	203.62	20.36
   Thiamine	265.35	337.23	33.72
   trans-Urocanate	137.118	137.12	13.71
   UMP	324.1813	368.15	36.82
   Xanthine	152.11	152.11	15.21

   Note: Dissolve this pool at 28.54 mg/ml for 5 mM solution.
   
   Table 7. Chemical standard library pool 3
   

   Metabolite name	Molecular weight of metabolite	Molecular weight of chemical standard	Amount to weigh (mg)
   3-hydroxybutyric acid	104.1045	126.09	252.18
   Acetylalanine	131.1299	131.13	262.26
   Acetylaspartate	175.139	175.14	350.28
   Acetylcarnitine	203.2356	239.70	479.40
   Acetylglutamine	188.183	188.18	376.36
   ADP	427.203	501.32	1002.64
   Allantoin	158.121	158.121	316.24
   CDP	403.177	403.20	806.40
   CDP-choline	489.332	510.31	1020.62
   Coenzyme A	767.535	767.53	1535.06
   Creatinine	113.12	113.12	226.24
   gamma-aminobutyric acid	103.12	103.12	206.24
   GDP	443.201	443.20	886.40
   Glutathione disulfide	612.631	612.63	1225.26
   Glycerate	106.0773	286.25	572.50
   Hypoxanthine	136.1115	136.11	272.22
   myo-Inositol	180.16	180.16	360.32
   NAD+	663.43	663.43	1326.86
   p-aminobenzoate	137.138	137.14	274.28
   Phosphocholine	184.152	329.73	659.46
   Sorbitol	182.17	182.17	364.34
   UDP	404.1612	448.12	896.24
   UDP-glucose	566.302	610.27	1220.54

   Note: Dissolve this pool at 37.23 mg/ml for 5 mM solution.
   
   Table 8. Chemical standard library pool 4
   

   Metabolite name	Molecular weight of metabolite	Molecular weight of chemical standard	Amount to weigh (mg)
   Phenylacetylglutamine	264.3	264.3	17.17
   Acetylglutamate	189.1659	189.1659	12.29
   Acetylglycine	117.1033	117.1033	7.61
   Acetylmethionine	191.245	191.245	12.43
   Asymmetric dimethylarginine	202.25	275.2	17.88
   ATP	507.18	551.14	35.82
   CTP	483.1563	527.12	34.26
   dATP	491.2	535.15	34.78
   dCTP	467.2	511.12	33.22
   Deoxycytidine	227.2172	227.2172	14.76
   Folic acid	441.3975	441.3975	28.69
   GTP	523.2	523.18	34.00
   Hypotaurine	109.1475	109.1475	7.09
   Methionine sulfoxide	165.21	165.21	10.73
   Methylthioadenosine	297.3335	297.3335	19.32
   Phosphocreatine	211.114	255.08	16.58
   Pyridoxine	169.18	205.64	13.36
   Ribose-5-phosphate	230.11	310.1	20.15
   SAH	384.4	384.41	24.98
   Thymidine	242.2286	242.2286	15.74
   Trimethyllysine	189.279	224.73	14.60
   Uridine	244.2014	244.2014	15.87
   UTP	484.1411	559.09	36.34

   Note: Dissolve this pool at 36.75 mg/ml for 5 mM solution.
   
   Table 9. Chemical standard library pool 5
   

   Metabolite name	Molecular weight of metabolite	Molecular weight of chemical standard	Amount to weigh (mg)
   3-phosphoglycerate	186.06	230.02	57.51
   cis-aconitic acid	174.108	174.11	43.53
   Citrate	192.124	294.10	73.53
   DHAP	170.06	180.19	45.05
   Fructose-1,6-bisphosphate	340.1157	406.06	101.52
   Fumarate	116.07	116.07	29.02
   Glucose-6-phosphate	260.135	282.12	70.53
   Glycerol-3-phosphate	172.0737	370.40	92.60
   Guanidinoacetate	117.1066	117.11	29.28
   Kynurenine	208.2139	208.21	52.05
   Malate	134.0874	134.09	33.52
   NADP+	744.413	765.39	191.35
   Niacinamide	122.12	122.12	30.53
   2-oxoglutarate	146.11	146.11	36.53
   Phosphoenolpyruvate	168.042	267.22	66.81
   Pyruvate	88.06	110.04	27.51
   Succinate	118.09	118.09	29.52
   Uracil	112.0868	112.09	28.02

   Note: Dissolve this pool at 20.77 mg/ml for 5 mM solution.
   
   Table 10. Chemical standard library pool 6
   

   Metabolite name	Molecular weight of metabolite	Molecular weight of chemical standard	Amount to weigh (mg)
   3-hydroxyisobutyric acid	104.1045	126.09	22.07
   2-hydroxyglutarate	148.114	192.10	33.62
   Aminoadipate	161.156	161.16	28.20
   beta-alanine	89.093	89.09	15.59
   Carbamoylaspartate	176.128	176.13	30.82
   Cystathionine	222.263	222.26	38.90
   Cysteic acid	169.16	169.16	29.60
   FAD	785.5497	829.51	145.16
   Glycerophosphocholine	258.231	257.22	45.01
   Inosine	268.229	268.23	46.94
   Orotate	156.1	194.19	33.98
   Pantothenate	219.23	238.27	41.70
   Phosphoserine	185.07	185.07	32.39
   Riboflavin	376.369	376.37	65.86
   UDP-GlcNAc	607.3537	651.32	113.98
   Uric acid	168.1103	168.11	29.42

   Note: Dissolve this pool at 21.52 mg/ml for 5 mM solution.
   
   Table 11. Chemical standard library pool 7
   

   Metabolite name	Molecular weight of metabolite	Molecular weight of chemical standard	Amount to weigh (mg)
   Itaconic acid	130.0987	130.10	52.04
   Homocysteine	135.185	135.19	54.07
   2-oxobutyric acid	102.0886	102.09	40.84
   2-hydroxybutyric acid	104.1045	126.09	50.44
   Ascorbate	176.1241	198.11	79.24
   Sarcosine	89.0932	89.09	35.64
   Dimethylglycine	103.1198	103.12	41.25
   N6-acetyllysine	188.2242	188.22	75.29
   Pipecolate	129.157	129.16	51.66
   Indolelactate	205.2099	205.21	82.08
   Picolinate	123.1094	123.11	49.24
   3-methyl-2-oxobutyrate	116.1152	138.10	55.24
   3-methyl-2-oxopentanoic acid	130.1418	152.12	60.85
   Formyl-methionine	177.221	177.22	70.89
   2-aminobutyric acid	103.1198	103.12	41.25
   Homocitrulline	189.2123	189.21	75.68
   gamma-glutamyl-alanine	217.2224	218.21	87.28
   Mannose	180.16	180.16	72.06
   Cysteine-glycine (dipeptide)	178.21	178.21	71.28

   Note: Dissolve this pool at 14.33 mg/ml for 5 mM solution.
   

Acknowledgments

This protocol is based on our previously published study (Sullivan et al., 2019). This work has been supported by a grant to AM from the NIH (F32CA213810). MRS was supported by T32GM007287 and acknowledges additional support from an MIT Koch Institute Graduate Fellowship.

Competing interests

The authors report no competing interests. CAL is a paid consultant for ReviveMed.

Ethics

This study was performed in accordance with the recommendations in the Guide for the Care and Use of Laboratory Animals. All animal experiments were performed using protocols (#1115-110-18) that were approved by the MIT Committee on Animal Care (IACUC). All surgeries were performed using isoflurane anesthesia administered by vaporizer and every effort was made to minimize suffering.

References

1. Abbondante, S., Eckel-Mahan, K. L., Ceglia, N. J., Baldi, P. and Sassone-Corsi, P. (2016). Comparative circadian metabolomics reveal differential effects of nutritional challenge in the serum and liver. J Biol Chem 291(6): 2812-2828.
2. Anastasiou, D. (2017). Tumour microenvironment factors shaping the cancer metabolism landscape. Br J Cancer 116(3): 277-286.
3. Bi, J., Wu, S., Zhang, W. and Mischel, P. S. (2018). Targeting cancer's metabolic co-dependencies: A landscape shaped by genotype and tissue context. Biochim Biophys Acta Rev Cancer 1870(1): 76-87.
4. Burgess, E. A. and Sylven, B. (1962). Glucose, lactate, and lactic dehydrogenase activity in normal interstitial fluid and that of solid mouse tumors. Cancer Res 22: 581-588.
5. Cairns, R. A., Harris, I. S. and Mak, T. W. (2011). Regulation of cancer cell metabolism. Nat Rev Cancer 11(2): 85-95.
6. Cantor, J. R., Abu-Remaileh, M., Kanarek, N., Freinkman, E., Gao, X., Louissaint, A. Jr., Lewis, C. A., and Sabatini, D.M. (2017). Physiologic Medium Rewires Cellular Metabolism and Reveals Uric Acid as an Endogenous Inhibitor of UMP Synthase. Cell 169(2): 258-272 e217.
7. Chong, J., Soufan, O., Li, C., Caraus, I., Li, S., Bourque, G., Wishart, D. S. and Xia, J. (2018). MetaboAnalyst 4.0: towards more transparent and integrative metabolomics analysis. Nucleic Acids Res 46(W1): W486-W494.
8. Dallmann, R., Viola, A. U., Tarokh, L., Cajochen, C. and Brown, S. A. (2012). The human circadian metabolome. Proc Natl Acad Sci U S A 109(7): 2625-2629.
9. DeBerardinis, R. J. and Chandel, N. S. (2016). Fundamentals of cancer metabolism. Sci Adv 2(5): e1600200.
10. Eil, R., Vodnala, S. K., Clever, D., Klebanoff, C. A., Sukumar, M., Pan, J. H., Palmer, D. C., Gros, A., Yamamoto, T. N., Patel, S. J., Guittard, G. C., Yu, Z., Carbonaro, V., Okkenhaug, K., Schrump, D. S., Linehan, W M., Roychoudhuri, R. and Restifo, N. P. (2016). Ionic immune suppression within the tumour microenvironment limits T cell effector function. Nature 537: 539-543.
11. Evans, A. M., DeHaven, C. D., Barrett, T., Mitchell, M. and Milgram, E. (2009). Integrated, nontargeted ultrahigh performance liquid chromatography/electrospray ionization tandem mass spectrometry platform for the identification and relative quantification of the small-molecule complement of biological systems. Anal Chem 81(16): 6656-6667.
12. Gieger, C., Geistlinger, L., Altmaier, E., Hrabé de Angelis, M., Kronenberg, F., Meitinger, T., Mewes, H. W., Wichmann, H. E., Weinberger, K. M., Adamski, J., Illig, T. and Suhre, K. (2008). Genetics meets metabolomics: a genome-wide association study of metabolite profiles in human serum. PLoS Genet 4(11): e1000282.
13. Gullino, P. M., Clark, S. H. and Grantham, F. H. (1964). The interstitial fluid of solid tumors. Cancer Res 24: 780-794.
14. Guijas, C., Montenegro-Burke, J. R., Domingo-Almenara, X., Palermo, A., Warth, B., Hermann, G., Koellensperger, G., Huan, T., Uritboonthai, W., Aisporna, A. E., Wolan, D. W., Spilker, M. E., Benton, H. P. and Siuzdak, G. (2018). METLIN: a technology platform for identifying knowns and unknowns. Anal Chem 90(5): 3156-3164.
15. Haslene-Hox, H., Oveland, E., Berg, K. C., Kolmannskog, O., Woie, K., Salvesen, H. B., Tenstad, O. and Wiig, H. (2011). A new method for isolation of interstitial fluid from human solid tumors applied to proteomic analysis of ovarian carcinoma tissue. PLoS One 6(4): e19217.
16. Ho, P. C., Bihuniak, J. D., Macintyre, A. N., Staron, M., Liu, X., Amezquita, R., Tsui, Y. C., Cui, G., Micevic, G., Perales, J. C., Kleinstein, S. H., Abel, E. D., Insogna, K. L., Feske, S., Locasale, J. W., Bosenberg, M. W., Rathmell, J. C., Kaech, S. M. (2015). Phosphoenolpyruvate is a metabolic checkpoint of anti-tumor T cell responses. Cell 162(6): 1217-1228.
17. Lawton, K. A., Berger, A., Mitchell, M., Milgram, K. E., Evans, A. M., Guo, L., Hanson, R. W., Kalhan, S. C., Ryals, J. A. and Milburn, M. V. (2008). Analysis of the adult human plasma metabolome. Pharmacogenomics 9(4): 383-397.
18. Mazzone, P. J., Wang, X. F., Beukemann, M., Zhang, Q., Seeley, M., Mohney, R., Holt, T. and Pappan, K. L. (2016). Metabolite Profiles of the Serum of Patients with Non-Small Cell Carcinoma. J Thorac Oncol 11(1): 72-78
19. Muir, A., Danai, L. V. and Vander Heiden, M. G. (2018). Microenvironmental regulation of cancer cell metabolism: implications for experimental design and translational studies. Dis Model Mech 11(8).
20. Nagarajan, A., Malvi, P. and Wajapeyee, N. (2016). Oncogene-directed alterations in cancer cell metabolism. Trends Cancer 2(7): 365-377.
21. Panuwet, P., Hunter, R. E., Jr., D'Souza, P. E., Chen, X., Radford, S. A., Cohen, J. R., Marder, M. E., Kartavenka, K., Ryan, P. B. and Barr, D. B. (2016). Biological matrix effects in quantitative tandem mass spectrometry-based analytical methods: advancing biomonitoring. Crit Rev Anal Chem 46(2): 93-105.
22. Schroeder, K. S. V. A. (2019). Blood Withdrawal I. JoVE.
23. Siska, P. J., Beckermann, K. E., Mason, F. M., Andrejeva, G., Greenplate, A. R., Sendor, A. B., Chiang, Y. J., Corona, A. L., Gemta, L. F., Vincent, B. G., Wang, R. C., Kim, B., Hong, J., Chen, C. L., Bullock, T. N., Irish, J. M., Rathmell, W. K. and Rathmell, J. C. (2017). Mitochondrial dysregulation and glycolytic insufficiency functionally impair CD8 T cells infiltrating human renal cell carcinoma. JCI Insight 2(12).
24. Spinelli, J. B., Yoon, H., Ringel, A. E., Jeanfavre, S., Clish, C. B. and Haigis, M. C. (2017). Metabolic recycling of ammonia via glutamate dehydrogenase supports breast cancer biomass. Science 358(6365): 941-946.
25. Stevens, V. L., Hoover, E., Wang, Y. and Zanetti, K. A. (2019). Pre-analytical factors that affect metabolite stability in human urine, plasma, and serum: A review. Metabolites 9(8):156.
26. Sullivan, M. R., Danai, L. V., Lewis, C. A., Chan, S. H., Gui, D. Y., Kunchok, T., Dennstedt, E. A., Vander Heiden, M. G. and Muir, A. (2019). Quantification of microenvironmental metabolites in murine cancers reveals determinants of tumor nutrient availability. Elife 8: e44235.
27. Wiig, H. and Swartz, M. A. (2012). Interstitial fluid and lymph formation and transport: physiological regulation and roles in inflammation and cancer. Physiol Rev 92(3): 1005-1060.
28. Wiig, H., Tenstad, O., Iversen, P. O., Kalluri, R. and Bjerkvig, R. (2010). Interstitial fluid: the overlooked component of the tumor microenvironment? Fibrogenesis Tissue Repair 3: 12.
29. Zhang, Y., Kurupati, R., Liu, L., Zhou, X. Y., Zhang, G., Hudaihed, A., Filisio, F., Giles-Davis, W., Xu, X., Karakousis, G. C., Schuchter, L. M., Xu, W., Amaravadi, R., Xiao, M., Sadek, N., Krepler, C., Herlyn, M., Freeman, G. J., Rabinowitz, J. D. and Ertl, H. C. J. (2017). Enhancing CD8⁺ T cell fatty acid catabolism within a metabolically challenging tumor microenvironment increases the efficacy of melanoma immunotherapy. Cancer Cell 32(3): 377-391.