2.2. Experimental Procedure
This protocol is extracted from research article:
Can Heart Rate Variability (HRV) Be Used as a Biomarker of Thermal Comfort for Mine Workers?
Int J Environ Res Public Health, Jul 17, 2021; DOI: 10.3390/ijerph18147615

The preparation process was conducted in a room with an air temperature of 26 °C. ECG recorders (Healink Ltd., Bengbu, China) were mounted at designated sites on the subjects and then coveralls were donned. The entire preparatory process lasted approximately 15 min. When the temperature and humidity of the cabin reached the experimental requirements, the ECG recorder was turned on, and the subjects entered the environmental chamber and sat still for 25 min. They came out of the cabin and entered the preparation room to rest for 5 min. Water was allowed during rest. The subjects entered the cabin and began the first-stage running test with a speed controlled at 5.5 km/h. Running at this speed is equivalent to heavy labor [11]. After running for 25 min, the subjects went to the preparation room and rested for 5 min. Running and resting were repeated 2 more times, and the whole experiment was completed. The procedure of the test is shown in Table 1. The study was conducted in accordance with the Declaration of Helsinki, and the protocol was approved by the Ethics Committee of Guilin University of Electronics and Technology.

Experimental Procedure.

Note: The content above has been extracted from a research article, so it may not display correctly.

Please log in to submit your questions online.
Your question will be posted on the Bio-101 website. We will send your questions to the authors of this protocol and Bio-protocol community members who are experienced with this method. you will be informed using the email address associated with your Bio-protocol account.

We use cookies on this site to enhance your user experience. By using our website, you are agreeing to allow the storage of cookies on your computer.