Firstly, SDP, ODP, TDP, ABP, DP, 4,4-DB, 2,2-DP, and BFPE (0.3 mg/mL for each phosphor) were, respectively, dispersed in eight vials containing PVA solutions with the concentration of 30 mg/mL. Eight homogeneous solutions were obtained after ultrasonication for 5 h, which were then left standing for one hour. Secondly, a series of films was fabricated by a drop-casting the prepared aqueous solutions on 75 mm × 25 mm glass substrates. Then, these films were dried at 65 °C for 3 h. Lastly, the designed images were superimposed and fixed on the film surface, and the double layers were irradiated by a portable UV-254 nm lamp for 45 min to generate the printing patterns.

Note: The content above has been extracted from a research article, so it may not display correctly.

Please log in to submit your questions online.
Your question will be posted on the Bio-101 website. We will send your questions to the authors of this protocol and Bio-protocol community members who are experienced with this method. you will be informed using the email address associated with your Bio-protocol account.

We use cookies on this site to enhance your user experience. By using our website, you are agreeing to allow the storage of cookies on your computer.