A Rohde & Schwarz SMB 100A signal generator was used to generate microwave with a frequency of 8 to 12 GHz and a nominal power of 18 dBm. We verified that power in the range of 10 to 18 dBm did not affect the measured SHA but only the signal-to-noise ratio. The ST-FMR measurement was modulated with a sine function to improve the signal-to-noise ratio. A nonmagnetic GSG three-terminal probe manufactured by GGB Industries Inc. was used to make electrical contact with the electrode. The probe was carefully rotated to ensure homogeneous contact. The modulated voltage output (Vmix) was collected using a Stanford Research SR830 lock-in amplifier.

Note: The content above has been extracted from a research article, so it may not display correctly.

Please log in to submit your questions online.
Your question will be posted on the Bio-101 website. We will send your questions to the authors of this protocol and Bio-protocol community members who are experienced with this method. you will be informed using the email address associated with your Bio-protocol account.

We use cookies on this site to enhance your user experience. By using our website, you are agreeing to allow the storage of cookies on your computer.