A FEI Quanta 3D dual beam (SEM/FIB) system was used to prepare pillars with the geometry of 1500 nm by 850 nm by 120 nm. In situ TEM compression tests were conducted at room temperature using a Hysitron picoindenter 95 equipped with a flat tip in a JEOL JEM-2800 TEM operating at 200 kV. The uniaxial compression tests were performed in displacement-controlled mode with an axial displacement rate of 3 nm s–1. A Gatan one-view charge-coupled device camera was used to record time-resolved TEM images of the regions of interest at 30 frames per second.

Note: The content above has been extracted from a research article, so it may not display correctly.



Q&A
Please log in to submit your questions online.
Your question will be posted on the Bio-101 website. We will send your questions to the authors of this protocol and Bio-protocol community members who are experienced with this method. you will be informed using the email address associated with your Bio-protocol account.



We use cookies on this site to enhance your user experience. By using our website, you are agreeing to allow the storage of cookies on your computer.