Filaments of selected composites of NBR41–60 wt % HW lignin and 40 wt % HW lignin in nylon 12 were extruded at 210°C using a custom-designed single-shot extruder equipped with a single die. The filament diameter is ca. 2.5 mm. The materials were 3D printed on a LulzBot TAZ printer equipped with a 0.5-mm-diameter nozzle. The printing and the bed temperatures for HIPS and lignin-based composites are 230° and 100°C, respectively. All samples were 3D printed, with the same printing protocol for comparison. The Cura-LulzBot software was used to control the printing process.

Note: The content above has been extracted from a research article, so it may not display correctly.



Q&A
Please log in to submit your questions online.
Your question will be posted on the Bio-101 website. We will send your questions to the authors of this protocol and Bio-protocol community members who are experienced with this method. you will be informed using the email address associated with your Bio-protocol account.



We use cookies on this site to enhance your user experience. By using our website, you are agreeing to allow the storage of cookies on your computer.