Izod tests were carried out at RT for each CNC composition in a Pantech Instruments (São Paulo, Brazil), using a 11 J hammer pendulum. Prismatic standard [28] notched specimens with a depth of 2.54 mm and an angle of 45° were fabricated using a Notchvas model CEAST carver. Four samples for each percentage of CNCs with dimensions of 62.5 × 12.7 × 10 mm were produced. Figure 3 shows schematics the specimens of the Izod tests.

Schematic of dimensions of Izod-type test specimen according to the standard.

Note: The content above has been extracted from a research article, so it may not display correctly.

Please log in to submit your questions online.
Your question will be posted on the Bio-101 website. We will send your questions to the authors of this protocol and Bio-protocol community members who are experienced with this method. you will be informed using the email address associated with your Bio-protocol account.

We use cookies on this site to enhance your user experience. By using our website, you are agreeing to allow the storage of cookies on your computer.